Welding stud type PT | A2 | ISO 13918
Mängdrabatt -20% vid köp av: 200 st
Weld stud type PT in stainless steel A2 is intended for use where a permanent, threaded attachment point is needed without through-holes. The product meets ISO 13918 and is used where rapid stud welding and good corrosion resistance are required. It is suitable for professional installations where long service life and consistent performance are essential.
APPLICATION AREA
The product is used in the construction, ventilation, and engineering industries, for example when mounting on thin sheet metal, railings, cable ladders, and ventilation fittings. It is intended for applications where rapid stud welding on thin sheet metal without through-holes is required and where the material choice provides necessary protection against corrosion and mechanical stress.
TECHNICAL SPECIFICATIONS
- Product type: Weld stud
- Product family: Weld studs
- Material grade: A2
- Property class: A2-50 (certain dimensions A2-70, see variant)
- Standard: ISO 13918, type PT
- Thread dimension: M4–M8
- Design: Type PT (threaded stud with ignition tip for capacitor discharge welding)
- Environment: Indoor / Outdoor
- Unit of delivery: Piece
FREQUENTLY ASKED QUESTIONS (FAQ)
What does type PT mean and when is it used?
Type PT is a threaded weld stud with an ignition tip for capacitor discharge welding (CD welding with tip ignition) according to ISO 13918. The welding time is very short and the heat impact is minimal, making the method suitable for thin sheet metal. No ceramic ferrule or shielding gas is needed.
How do I choose the right length of the weld stud?
Base it on the thickness of the part being mounted over the stud, as well as the height of the washer and nut. During capacitor discharge welding, essentially only the ignition tip is consumed, so the length of the stud remains almost unchanged after welding.
Can A2 withstand a marine or salt-water environment?
No. A2 (AISI 304) is suitable for indoor and normal outdoor environments but is not acid-proof. In contact with salt water or chlorides, acid-proof A4 (AISI 316) is recommended.
What welding equipment is required for the installation of a type PT stud?
Type PT is welded using capacitor discharge (CD) stud welding equipment with tip ignition and a welding gun with a chuck for the specific stud diameter. A ceramic ferrule is not used.
