Button head socket screw | A2 | ISO 7380
Mängdrabatt -20% vid köp av: 200 st
A2 stainless steel button head socket screw, also known as a button head bolt, MK6S, K6S, or button head screw, is intended for use in indoor and standard outdoor environments. The product complies with ISO 7380-1 (formerly DIN 7380) and is used where a low, rounded head with an internal hexagon (Allen) drive is required. It is suitable for professional installations where long service life and consistent performance are essential.
FIELD OF APPLICATION
The product is used in machine construction, the engineering industry, interior design, furniture and retail fittings, electronics and appliance manufacturing, as well as in vehicles and equipment for indoor and standard outdoor environments. It is intended for applications where a low head height, a smooth and rounded finish, and secure tightening with a hex key are required, and where the choice of material provides the necessary protection against corrosion and mechanical stress. The screw is available in thread dimensions M3, M4, M5, M6, M8, M10, and M12, with lengths ranging from 4 to 120 mm.
TECHNICAL SPECIFICATIONS
- Product type: Screw
- Product family: Button head socket screw (button head, MK6S, K6S)
- Material grade: A2 (AISI 304)
- Strength class: A2-70
- Standard: ISO 7380-1 (replaces DIN 7380)
- Thread dimension: Metric thread M3–M12, fully threaded
- Drive type: Internal hexagon (Allen)
- Design: Button (semi-round) low head
- Surface finish: Bright stainless
- Environment: Indoor / Outdoor
- Delivery unit: Piece
FREQUENTLY ASKED QUESTIONS (FAQ)
What is a button head socket screw and what does ISO 7380 mean?
A button head socket screw is a machine screw with a low, rounded head and an internal hexagon drive. ISO 7380-1 specifies the dimensions and design of the screw and has replaced the older German standard DIN 7380; the terms are often used synonymously. In the industry, the screw is also known as a button head bolt, MK6S, or K6S.
What is the difference between a button head socket screw (ISO 7380) and a cylinder head socket screw (DIN 912)?
DIN 912 has a high cylindrical head and can withstand higher tightening torques. ISO 7380 has a significantly lower and rounded head that protrudes less and lacks sharp edges, but the hex socket is shallower; therefore, the screw should be tightened with lower torque than the corresponding DIN 912.
What is the difference between A2 and A4?
A2 (AISI 304) is stainless steel suitable for indoor and standard outdoor environments. A4 (AISI 316) is acid-proof due to the addition of molybdenum and has better resistance to chlorides, for example in saltwater, coastal environments, swimming pools, and when in contact with road salt. For such environments, we recommend Button head socket screw in A4 according to DIN 7380.
How do I choose the right length?
The length of a button head socket screw is measured from the underside of the head to the tip of the screw; the head is not included. Choose a length that provides at least 1–1.5 × the thread diameter of engagement in a threaded component, or that leaves a few threads protruding beyond the nut in through-bolt connections.
Köpte av anledningen att det var så snabb leveranstid men tog betydligt längre än så och har ingen nytta av skruven längre
Tack för din återkopplingen. Anledningen till den längre leveranstiden kommer av att du beställt en beställningsvara med 1-2veckors leveranstid
