{"title":"Wire rope and accessories","description":"\u003cp\u003e\u003cstrong\u003eHere you will find stainless steel wire rope and wire rope accessories for railings, rigging, construction and industry!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe range includes steel wire ropes in acid-resistant stainless steel A4 (AISI 316) in the constructions 1x19, 7x7 and 7x19, also PVC-coated, as well as everything needed to finish and tension the wire rope: wire rope clips (single, double, thimble clips DIN 741 and with stop screw), thimbles, wire rope terminals and turnbuckles. 1x19 is the stiffest and stretches the least – right for railings and stays. 7x7 and 7x19 are more flexible and suitable where the wire rope needs to be bent or run over pulleys. Used for wire rope railings on balconies and stairs, pergolas and green walls, rigging and running rigging on boats, as well as barriers and suspensions where a long lifespan and corrosion resistance are required.\u003c\/p\u003e","products":[{"product_id":"kaus","title":"Kaus | A4 | M8247","description":"\u003cp\u003e\u003cstrong\u003eStainless steel thimble A4\u003c\/strong\u003e for wire rope and rope in A4 \/ AISI 316 stainless steel is intended for use in demanding environments where high corrosion resistance and mechanical protection are required. The product is used to form and reinforce loops in both wire rope and rope, which reduces wear and deformation under load. The design provides a smooth radius that distributes the load and protects the material from point loading and abrasion. It is suitable for installations where a long service life and maintained function in connections are crucial.\u003c\/p\u003e\n\u003ch2\u003eFIELD OF APPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine rigging, mooring, lifting applications, wire and rope systems, as well as structural construction. It is intended for applications where loops in wire or rope are required, for example in combination with wire rope clips, splices, or swage sleeves. The thimble protects at attachment points such as shackles, hooks, or bolts and ensures that the load is distributed correctly without damaging the wire or rope. The choice of material provides resistance to salt water, moisture, and chemically aggressive environments.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Hardware\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e Thimble\u003cbr\u003e\u003cstrong\u003eMaterial class:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eItem number:\u003c\/strong\u003e M8247\u003cbr\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4–20 mm\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e For wire rope and rope\u003cbr\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Untreated\u003cbr\u003e\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Marine\u003cbr\u003e\u003cstrong\u003eDelivery unit:\u003c\/strong\u003e Piece\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhat is a thimble and why is it crucial when creating wire rope loops?\u003c\/h3\u003e\n\u003cp\u003eA \u003cb\u003ethimble\u003c\/b\u003e is a grooved metal profile that is inserted inside a loop on a wire rope or a line:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePrevents abrasion and chafing:\u003c\/b\u003e When the loop is connected to shackles, hooks, or eye bolts, the thimble absorbs all friction and point loading, protecting the wire's individual strands from wearing through.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaintains the wire's natural bend radius:\u003c\/b\u003e Without a thimble, the loop flattens under heavy load, creating sharp bending angles that drastically reduce the wire's actual breaking load.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEven force distribution:\u003c\/b\u003e The oval teardrop shape distributes the pulling force smoothly over the entire curvature of the loop.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eWhy is acid-resistant stainless steel A4 (AISI 316) required for thimbles in rigging and marine environments?\u003c\/h3\u003e\n\u003cp\u003eIn rigging and marine applications, the thimble is constantly exposed to water, salt, and high mechanical stress:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMaximum protection against crevice corrosion:\u003c\/b\u003e Because the wire sits tightly pressed into the thimble's groove, narrow crevices are formed where moisture and salt become trapped. The molybdenum content of the A4 steel prevents pitting and crevice corrosion under the wire groove.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eWithstands coastal areas and chemicals:\u003c\/b\u003e A4 steel is the obvious choice for standing rigging on sailboats, lifting devices on docks, offshore, and in the chemical industry.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eGalvanic compatibility:\u003c\/b\u003e When the thimble is used together with stainless steel wire rope (A4), the risk of galvanic corrosion between the wire and the thimble is eliminated.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eHow do you choose the right size of thimble and how do you install it safely?\u003c\/h3\u003e\n\u003col start=\"1\"\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eDimension according to the wire diameter:\u003c\/b\u003e The size of the thimble indicates the \u003cb\u003emaximum wire diameter\u003c\/b\u003e that fits in the outer groove (e.g., a 6 mm thimble should be used for a 5–6 mm wire). The wire should sit firmly in the groove without tilting.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eCombine with wire rope clips or swage sleeves:\u003c\/b\u003e Pull the wire tightly around the thimble and secure the loop with A4 stainless steel wire rope clips or crimp a copper\/stainless steel sleeve.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePositioning of wire rope clips:\u003c\/b\u003e When securing the loop, the first wire rope clip should be placed directly next to the pointed end of the thimble so that the thimble is completely locked in place and cannot fall out if the load is released.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ol\u003e","brand":"WASI","offers":[{"title":"4mm","offer_id":48088705794390,"sku":"400072","price":3.5,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":48088705827158,"sku":"400073","price":5.0,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":48088705859926,"sku":"400074","price":6.0,"currency_code":"SEK","in_stock":true},{"title":"8mm","offer_id":48088705892694,"sku":"400075","price":10.0,"currency_code":"SEK","in_stock":true},{"title":"10mm","offer_id":48088705925462,"sku":"400076","price":12.0,"currency_code":"SEK","in_stock":true},{"title":"12mm","offer_id":48088705958230,"sku":"400077","price":29.0,"currency_code":"SEK","in_stock":true},{"title":"14mm","offer_id":48088705990998,"sku":"400078","price":49.0,"currency_code":"SEK","in_stock":true},{"title":"16mm","offer_id":48088706023766,"sku":"400079","price":69.0,"currency_code":"SEK","in_stock":true},{"title":"18mm","offer_id":48088706056534,"sku":"400080","price":79.0,"currency_code":"SEK","in_stock":true},{"title":"20mm","offer_id":48088706089302,"sku":"400081","price":99.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-a4-stainless-steel-thimbles.jpg?v=1787057964"},{"product_id":"vajer-7x19-trad-a4","title":"Steel wire rope | 7x19 strand | A4 | DIN 3060","description":"\u003cp\u003eDo you need a flexible and durable wire rope that can withstand harsh environments? \u003cstrong\u003eWire 7x19 Soft in acid-proof stainless steel A4 (AISI 316)\u003c\/strong\u003e is designed for high strength and maximum flexibility. The soft, pliable construction with 7 strands and 19 wires per strand makes it ideal for applications where the wire needs to run over pulleys or be subjected to movement.\u003c\/p\u003e\n\u003cp\u003eThanks to the acid-proof A4 material, the wire has very high corrosion resistance and is excellently suited for marine, chemical, and outdoor environments. It retains its strength and finish even in saltwater and other aggressive environments.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATIONS\u003c\/h2\u003e\n\u003cp\u003ePerfect for \u003cstrong\u003eboating and rigging, railings, wire systems, elevators, winches, structures, and architectural installations\u003c\/strong\u003e. Common in the \u003cstrong\u003emarine industry, construction, transport, interior design, and safety applications\u003c\/strong\u003e. The soft and flexible construction makes it easy to work with and simple to install using standard fittings and wire rope clips.\u003c\/p\u003e\n\u003cp\u003eNOTE: Not sold by the meter. \u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Wire rope\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 7x19 (very flexible)\u003cbr\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Soft (soft-laid)\u003cbr\u003e\u003cstrong\u003eQuality:\u003c\/strong\u003e A4 (AISI 316) acid-proof stainless steel\u003cbr\u003e\u003cstrong\u003eMaterial class:\u003c\/strong\u003e Stainless A4\u003cbr\u003e\u003cstrong\u003eCorrosion resistance:\u003c\/strong\u003e Very high – for marine and chemically demanding environments\u003cbr\u003e\u003cstrong\u003eSurface treatment:\u003c\/strong\u003e Untreated (natural-colored stainless steel)\u003c\/p\u003e\n\u003cp\u003eFor variants or quantities that we do not have in stock, this is a special order item that normally takes 1-2 weeks to arrive, provided it is in stock with the supplier. If you order different products, the order will be shipped complete once all items are available in our warehouse.\u003c\/p\u003e\n\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhat does the 7x19 \"Soft\" construction mean, and what are the benefits?\u003c\/h3\u003e\n\u003cp\u003eA 7x19 construction consists of 7 strands with 19 individual wires in each strand (133 wires in total). This makes the wire rope extremely soft, supple, and pliable compared to stiffer alternatives like 1x19 or 7x7. The high flexibility allows the wire to withstand repeated bending without fatigue, which is crucial when it runs over sheaves, blocks, pulleys, or is wound onto winch drums.\u003c\/p\u003e\n\u003ch3\u003eWhy is acid-proof A4 \/ AISI 316 required in marine and aggressive environments?\u003c\/h3\u003e\n\u003cp\u003eAcid-proof A4 steel (AISI 316 \/ 1.4401) is alloyed with molybdenum, which provides exceptional protection against pitting and corrosion from saltwater, brackish water, chlorine, and chemicals. It ensures that the wire rope retains its load-bearing capacity, structural integrity, and shiny finish even during prolonged exposure in harsh coastal areas and industrial environments.\u003c\/p\u003e\n\u003ch3\u003eHow do you select and install the correct end fittings for a 7x19 wire rope?\u003c\/h3\u003e\n\u003cp\u003eSince 7x19 is a soft and compressible wire rope, it is perfectly suited for swaged end sleeves (Talurit swaging), wire rope clips (e.g., DIN 741 or U-bolt clips), and wire rope terminals. When installing with wire rope clips, it is important to turn the U-bolt in the correct direction (with the saddle against the load-bearing part) and tighten to the recommended torque to avoid damaging or slipping the wire strands.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"1.5 \/ 250","offer_id":52201696690518,"sku":"400280","price":1100.0,"currency_code":"SEK","in_stock":true},{"title":"2 \/ 250","offer_id":52201762357590,"sku":"400281","price":1300.0,"currency_code":"SEK","in_stock":true},{"title":"2.5 \/ 250","offer_id":52201796010326,"sku":"400282","price":1350.0,"currency_code":"SEK","in_stock":true},{"title":"3 \/ 250","offer_id":52201799942486,"sku":"400283","price":1600.0,"currency_code":"SEK","in_stock":true},{"title":"4 \/ 100","offer_id":51471551168854,"sku":"400250","price":1100.0,"currency_code":"SEK","in_stock":true},{"title":"4 \/ 250","offer_id":52201705472342,"sku":"400251","price":2250.0,"currency_code":"SEK","in_stock":true},{"title":"5 \/ 100","offer_id":52201827205462,"sku":"400284","price":1600.0,"currency_code":"SEK","in_stock":true},{"title":"5 \/ 250","offer_id":52201831137622,"sku":"400285","price":3400.0,"currency_code":"SEK","in_stock":true},{"title":"6 \/ 100","offer_id":52201843523926,"sku":"400286","price":1650.0,"currency_code":"SEK","in_stock":true},{"title":"8 \/ 100","offer_id":52201858269526,"sku":"400288","price":3300.0,"currency_code":"SEK","in_stock":true},{"title":"10 \/ 100","offer_id":52201895166294,"sku":"400290","price":5200.0,"currency_code":"SEK","in_stock":true},{"title":"12 \/ 100","offer_id":52201941369174,"sku":"400292","price":7000.0,"currency_code":"SEK","in_stock":true},{"title":"6 \/ 250","offer_id":52201844343126,"sku":"400287","price":4100.0,"currency_code":"SEK","in_stock":true},{"title":"8 \/ 250","offer_id":52201865675094,"sku":"400289","price":8000.0,"currency_code":"SEK","in_stock":true},{"title":"10 \/ 250","offer_id":52201922920790,"sku":"400291","price":12500.0,"currency_code":"SEK","in_stock":true},{"title":"12 \/ 250","offer_id":52201945399638,"sku":"400293","price":16500.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/wire-7-19-A4-M8063..jpg?v=1777279604"},{"product_id":"stalvajer-1x19-trad-pvc-a4","title":"Steel wire rope | 1x19 strand | PVC coated | A4 | M8037","description":"\u003cp\u003eAre you looking for a reliable \u003cstrong\u003estainless steel wire rope\u003c\/strong\u003e for demanding environments? The 1x19 steel wire rope with a white PVC coating, made from A4 (AISI 316) stainless steel, is designed for high strength, low stretch, and a long service life, even in corrosive and marine environments. The rigid 1x19 construction provides high stability and a straight, aesthetically pleasing result, while the white PVC coating protects the wire rope against wear and provides a smooth, protective surface.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eIdeal for wire railings, guy wires, safety lines, and other installations requiring high strength and low flexibility in construction, architecture, industrial, and marine environments. The rigid 1x19 construction ensures minimal stretch and a stable result, making the installation both durable and aesthetically pleasing. Suitable for both professional installations and advanced projects where corrosion resistance and a long service life are essential.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e PVC-coated stainless steel wire rope\u003cbr\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 12385 (wire rope standard)\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e A4 AISI 316 stainless steel\u003cbr\u003e\u003cstrong\u003eSurface treatment:\u003c\/strong\u003e White PVC coating\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 1x19 strands, hard\/rigid construction\u003cbr\u003e\u003cstrong\u003eDiameter (wire\/coating):\u003c\/strong\u003e 2.5\/3.5 mm, 3\/5 mm, 4\/6 mm, and 5\/8 mm (the first dimension is the steel wire rope diameter, the second is the outer diameter with the PVC coating)\u003cbr\u003e\u003cstrong\u003eFlexibility:\u003c\/strong\u003e Low, intended for straight installations\u003cbr\u003e\u003cstrong\u003eCorrosion resistance:\u003c\/strong\u003e Very high, suitable for marine environments\u003cbr\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 100–250 m\u003cbr\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e Reel 100–250 m\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhat does the 1x19 wire rope construction mean, and what are its properties?\u003c\/h3\u003e\n\u003cp\u003eThe 1x19 construction consists of 19 hard, twisted strands in a single layer. This makes the wire rope very rigid and gives it a high breaking load with minimal stretch. The rigid construction makes it ideal for standing rigging, railings, fences, and guy lines where the wire rope must remain taut without sagging, but it is not suitable for bending around small pulleys or winches.\u003c\/p\u003e\n\u003ch3\u003eWhat purpose does the white PVC coating serve?\u003c\/h3\u003e\n\u003cp\u003eThe white PVC coating provides an extra protective layer against abrasion, dirt, and harsh weather, while also providing a clean and smooth surface. The coating prevents the wire rope from rubbing against adjacent materials (such as sails, covers, or painted surfaces) and also protects hands upon contact. It is also UV-stabilized to prevent cracking or yellowing in the sun.\u003c\/p\u003e\n\u003ch3\u003eWhy is A4 stainless steel (AISI 316) the right choice for demanding environments?\u003c\/h3\u003e\n\u003cp\u003eA4 stainless steel contains molybdenum, which provides the highest possible corrosion protection against salt water, road salt, and harsh chemical environments. Combined with the PVC coating, you get a wire rope that withstands extreme salt and moisture exposure in marine settings, coastal installations, and demanding industrial applications without rusting or losing strength.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2.5\/3.5 \/ 250","offer_id":52777988456790,"sku":"400296","price":3000.0,"currency_code":"SEK","in_stock":true},{"title":"3\/5 \/ 250","offer_id":52777988489558,"sku":"400297","price":4750.0,"currency_code":"SEK","in_stock":true},{"title":"4\/6 \/ 100","offer_id":52777988522326,"sku":"400298","price":2300.0,"currency_code":"SEK","in_stock":true},{"title":"4\/6 \/ 250","offer_id":52777988555094,"sku":"400299","price":5750.0,"currency_code":"SEK","in_stock":true},{"title":"5\/8 \/ 100","offer_id":52777988587862,"sku":"400300","price":3400.0,"currency_code":"SEK","in_stock":true},{"title":"5\/8 \/ 250","offer_id":52777988620630,"sku":"400301","price":9750.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/stalvajer-1x19-PVC-A4..jpg?v=1777279374"},{"product_id":"vantskruv-svetsad-gaffel-gaffel-a4-m8245","title":"Turnbuckle welded | fork\/fork | A4 | M8245","description":"\u003cp\u003e\u003cstrong\u003eTurnbuckle welded jaw\/jaw (wire tensioner) in stainless steel\u003c\/strong\u003e A4 is intended for use in corrosive and marine environments. The product is used where stepless length adjustment and controlled tensioning of wire, cable, or stays are required. The design enables precise fine-tuning of tensile force and length without dismantling the connection. It is suitable for installations where high corrosion resistance, reliable function, and long service life are crucial.\u003c\/p\u003e\n\u003ch2\u003eAREA OF APPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine rigging, wire systems, railing installations, building structures, and outdoor environments. It is intended for applications where adjustable wire tension, re-tensioning, and precise length setting are required, for example in wire railings, guy wires, antenna masts, and load-bearing wire structures. The material provides resistance to saltwater, moisture, and chemically aggressive environments.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Hardware\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e Turnbuckle\u003cbr\u003e\u003cstrong\u003eMaterial class:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eThread dimension:\u003c\/strong\u003e M5-M20\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Jaw\/jaw\u003cbr\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Polished\u003cbr\u003e\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Marine\u003cbr\u003e\u003cstrong\u003eUnit of supply:\u003c\/strong\u003e Each\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhat is a turnbuckle and what is it used for?\u003c\/h3\u003e\n\u003cp\u003eA turnbuckle (wire tensioner) is used to steplessly adjust and maintain the correct tension in wires, chains, and stays. By turning the central body, the two end fittings are pulled together or pushed apart thanks to opposing threads (right-hand and left-hand thread), without the wire itself rotating.\u003c\/p\u003e\n\u003ch3\u003eWhy is it important that the turnbuckle is in acid-proof A4 quality?\u003c\/h3\u003e\n\u003cp\u003eA4 steel (AISI 316 \/ 1.4401) contains molybdenum, which provides maximum resistance to rust, saltwater, and chemical stress. This makes A4 turnbuckles absolutely necessary for marine applications, boat rigging, fencing, and wire railings in coastal environments where standard stainless A2 products may eventually corrode.\u003c\/p\u003e\n\u003ch3\u003eHow do I choose the right end fitting (eye, hook, or jaw)?\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eEye:\u003c\/b\u003e For permanent and secure attachments using shackles or bolts.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eHook:\u003c\/b\u003e For quick assembly and disassembly where the wire needs to be easily unhooked.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eJaw:\u003c\/b\u003e For direct attachment to mounting plates, lugs, or eyebolts using a locking pin.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"WASI","offers":[{"title":"M5","offer_id":52972144361814,"sku":"400302","price":89.0,"currency_code":"SEK","in_stock":false},{"title":"M6","offer_id":52971934777686,"sku":"400101","price":109.0,"currency_code":"SEK","in_stock":true},{"title":"M8","offer_id":52971934810454,"sku":"400102","price":159.0,"currency_code":"SEK","in_stock":true},{"title":"M10","offer_id":52971934843222,"sku":"400103","price":239.0,"currency_code":"SEK","in_stock":true},{"title":"M12","offer_id":52971934875990,"sku":"400104","price":399.0,"currency_code":"SEK","in_stock":true},{"title":"M14","offer_id":52972144394582,"sku":"400303","price":499.0,"currency_code":"SEK","in_stock":false},{"title":"M16","offer_id":52972144427350,"sku":"400304","price":699.0,"currency_code":"SEK","in_stock":true},{"title":"M20","offer_id":52972144460118,"sku":"400305","price":999.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/vantskruv-svetsad-A4-M8245.jpg?v=1775204555"},{"product_id":"vantskruv-oppen-a4","title":"Open turnbuckle | jaw\/jaw | A4 | M8021","description":"\u003cp\u003e\u003cstrong\u003eStainless steel A4 open-body jaw\/jaw turnbuckle (rigging screw)\u003c\/strong\u003e is intended for use in corrosive and marine environments. The product is used where stepless adjustment of length and controlled tensioning of wire rope or stays is required. The design allows for precise fine-tuning of tension and length without dismantling the connection. It is suitable for installations where high corrosion resistance, reliable function, and long service life are critical.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine rigging, wire rope systems, railing installations, building constructions, and outdoor environments. It is intended for applications where adjustable wire tension, re-tensioning, and precise length adjustment are required, for example in wire railings, guy wires, antenna masts, and load-bearing wire constructions. The material provides resistance to saltwater, moisture, and chemically aggressive environments.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Fitting\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e Turnbuckle\u003cbr\u003e\u003cstrong\u003eMaterial class:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eThread dimension:\u003c\/strong\u003e M5–M20\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Jaw\/jaw\u003cbr\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Bright\u003cbr\u003e\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Marine\u003cbr\u003e\u003cstrong\u003eDelivery unit:\u003c\/strong\u003e Piece\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhat is a turnbuckle and how is it used?\u003c\/h3\u003e\n\u003cp\u003eA turnbuckle (also called a rigging screw) is used to re-tension and fine-tune the load in wires, chains, and steel rope. It consists of a central body with opposing threads (right-hand and left-hand threads) that pull the end fittings towards each other when the body is rotated.\u003c\/p\u003e\n\u003ch3\u003eWhat does it mean that the turnbuckle is made of acid-proof stainless steel A4?\u003c\/h3\u003e\n\u003cp\u003eAcid-proof stainless steel in quality A4 (equivalent to AISI 316 \/ 1.4401) contains molybdenum, which provides exceptionally good resistance to corrosion. This makes the turnbuckle suitable for use in demanding environments such as marine environments, coastal areas with salt spray, pool areas, and the chemical industry.\u003c\/p\u003e\n\u003ch3\u003eHow do I choose the right size and end fitting for the turnbuckle?\u003c\/h3\u003e\n\u003cp\u003eThe choice of size is governed by the wire diameter and the tensile load the turnbuckle needs to withstand. Regarding end fittings, you choose \u003cb\u003eeye\u003c\/b\u003e for permanent or locked attachments, \u003cb\u003ehook\u003c\/b\u003e for quick and easy detachment, or \u003cb\u003ejaw\u003c\/b\u003e for direct fastenings to plates, eyelets, and clevis pins.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M5","offer_id":52971992580438,"sku":"102989","price":89.0,"currency_code":"SEK","in_stock":false},{"title":"M6","offer_id":52971992613206,"sku":"102990","price":99.0,"currency_code":"SEK","in_stock":false},{"title":"M8","offer_id":52971984912726,"sku":"400098","price":149.0,"currency_code":"SEK","in_stock":true},{"title":"M10","offer_id":52971984945494,"sku":"400099","price":229.0,"currency_code":"SEK","in_stock":true},{"title":"M12","offer_id":52971984978262,"sku":"400100","price":399.0,"currency_code":"SEK","in_stock":true},{"title":"M14","offer_id":52971992645974,"sku":"102991","price":419.0,"currency_code":"SEK","in_stock":false},{"title":"M16","offer_id":52971992678742,"sku":"102992","price":959.0,"currency_code":"SEK","in_stock":true},{"title":"M20","offer_id":52971992711510,"sku":"102993","price":1369.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/vantskruv-oppen-A4-M8021.jpg?v=1775204552"},{"product_id":"vantskruv-oppen-ogla-ogla-a4-m8246","title":"Turnbuckle open | eye\/eye | A4 | M8246","description":"\u003cp\u003e\u003cstrong\u003eTurnbuckle, jaw\/jaw wire tensioner adjustable in A4 stainless steel\u003c\/strong\u003e is intended for use in corrosive and marine environments. The product is used where stepless length adjustment and controlled tensioning of wire rope, cable, or rigging are required. The eye\/eye design provides a secure and closed attachment at both ends, reducing the risk of accidental disconnection. The construction allows for precise fine-tuning of tension and length without dismantling the connection. It is suitable for installations where high corrosion resistance, reliable function, and long service life are essential.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine rigging, wire systems, railing installations, structural engineering, and outdoor environments. It is intended for applications requiring adjustable wire tension, re-tensioning, and precise length setting, such as in wire railings, guy wires, and structural cable constructions. The eye\/eye design is used where a permanent and secured attachment is desired at both ends, for example in combination with shackles or bolted connections. The material provides resistance to saltwater, moisture, and chemically aggressive environments.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Fitting\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e Turnbuckle\u003cbr\u003e\u003cstrong\u003eMaterial class:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eThread dimension:\u003c\/strong\u003e M5–M20\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Eye\/eye\u003cbr\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Bright\u003cbr\u003e\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Marine\u003cbr\u003e\u003cstrong\u003eDelivery unit:\u003c\/strong\u003e Piece\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eHow does a turnbuckle with eye\/eye work?\u003c\/h3\u003e\n\u003cp\u003eThe turnbuckle's central body (sleeve) has a right-hand threaded side and a left-hand threaded side. When you turn the sleeve, both eyes are pulled together or pushed apart simultaneously. This allows you to steplessly and accurately adjust the tension in wire and chain connections without the wire itself rotating.\u003c\/p\u003e\n\u003ch3\u003eWhy should one choose two eyes (eye\/eye) instead of a hook?\u003c\/h3\u003e\n\u003cp\u003eA closed eye at both ends provides maximum safety in permanent and loaded installations. Unlike a hook, there is no risk of the line, shackle, or mount accidentally unhooking if the wire tension were to temporarily drop or in the event of strong movements and wind loads.\u003c\/p\u003e\n\u003ch3\u003eWhat does it mean that the turnbuckle is made of acid-proof A4 steel?\u003c\/h3\u003e\n\u003cp\u003eA4 steel (AISI 316 \/ 1.4401) contains molybdenum, which provides superior protection against corrosion, saltwater, and chemical exposure. The turnbuckle is therefore fully adapted for marine environments, boat rigging, railings, shade sails, and coastal outdoor constructions where standard steel materials would quickly rust.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M5","offer_id":52972321702230,"sku":"400306","price":34.0,"currency_code":"SEK","in_stock":false},{"title":"M6","offer_id":52972291064150,"sku":"400082","price":49.0,"currency_code":"SEK","in_stock":true},{"title":"M8","offer_id":52972291096918,"sku":"400083","price":99.0,"currency_code":"SEK","in_stock":true},{"title":"M10","offer_id":52972291129686,"sku":"400084","price":159.0,"currency_code":"SEK","in_stock":true},{"title":"M12","offer_id":52972291162454,"sku":"400085","price":239.0,"currency_code":"SEK","in_stock":true},{"title":"M16","offer_id":52972291424598,"sku":"400156","price":649.0,"currency_code":"SEK","in_stock":true},{"title":"M20","offer_id":52972321734998,"sku":"400307","price":849.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/vantskruv-oppen-oga-ogla-M8246A.jpg?v=1775204547"},{"product_id":"vantskruv-oppen-krok-krok-a4-m8246","title":"Turnbuckle open | hook\/hook | A4 | M8246","description":"\u003cp\u003e\u003cstrong\u003eTurnbuckle, wire tensioner with hook\/hook, adjustable, in A4 stainless steel\u003c\/strong\u003e is intended for use in corrosive and marine environments. The product is used where stepless length adjustment and controlled tensioning of wire, cable, or stays are required. The hook\/hook design makes the turnbuckle quick to hook on and off, which facilitates assembly and disassembly. The construction allows for precise fine-tuning of tension and length without dismantling the connection. It is suitable for installations where high corrosion resistance, reliable functionality, and a long service life are essential.\u003c\/p\u003e\n\u003ch2\u003eAREA OF USE\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine rigging, wire systems, railing installations, building structures, and outdoor environments. It is intended for applications where adjustable wire tension, re-tensioning, and precise length setting are required, for example in cable railings, stay lines, and load-bearing wire structures. The hook\/hook design is used where the turnbuckle needs to be quickly hooked on and off, for example against an eye, ring, or eye bolt. The material provides resistance to salt water, moisture, and chemically aggressive environments.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Fitting\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e Turnbuckle\u003cbr\u003e\u003cstrong\u003eMaterial grade:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eThread dimension:\u003c\/strong\u003e M5–M20\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Hook\/hook\u003cbr\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Polished\u003cbr\u003e\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Marine\u003cbr\u003e\u003cstrong\u003eDelivery unit:\u003c\/strong\u003e Piece\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eHow does a hook\/hook turnbuckle work?\u003c\/h3\u003e\n\u003cp\u003eThe turnbuckle's center section (the body) has one right-hand threaded side and one left-hand threaded side. When you turn the body, both hooks are drawn together or pushed apart simultaneously. This allows you to steplessly and precisely adjust the tension in wire and chain connections without the wire itself twisting.\u003c\/p\u003e\n\u003ch3\u003eWhen should you choose hook\/hook instead of eye or fork?\u003c\/h3\u003e\n\u003cp\u003eHooks at both ends make it quick to hook the turnbuckle on and off, which is suitable for temporary or frequently dismantled installations. Because the hooks are open, they can unhook if tension is lost, so for permanent and heavily loaded installations, eye\/eye or fork\/fork is recommended.\u003c\/p\u003e\n\u003ch3\u003eWhat does it mean that the turnbuckle is made of acid-proof A4 steel?\u003c\/h3\u003e\n\u003cp\u003eA4 steel (AISI 316 \/ 1.4401) contains molybdenum, which provides superior protection against corrosion, salt water, and chemical exposure. The turnbuckle is therefore adapted for marine environments, boat rigging, railings, shade sails, and coastal outdoor structures where standard steel materials would quickly rust.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M5","offer_id":52972873384278,"sku":"400308","price":34.0,"currency_code":"SEK","in_stock":true},{"title":"M6","offer_id":52972873417046,"sku":"400086","price":49.0,"currency_code":"SEK","in_stock":true},{"title":"M8","offer_id":52972873449814,"sku":"400087","price":99.0,"currency_code":"SEK","in_stock":true},{"title":"M10","offer_id":52972873482582,"sku":"400088","price":159.0,"currency_code":"SEK","in_stock":true},{"title":"M12","offer_id":52972873515350,"sku":"400089","price":239.0,"currency_code":"SEK","in_stock":true},{"title":"M16","offer_id":52972873548118,"sku":"400309","price":649.0,"currency_code":"SEK","in_stock":true},{"title":"M20","offer_id":52972873580886,"sku":"400310","price":1100.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/vantskruv-oppen-krok-krok-A4-M8246.jpg?v=1775204551"},{"product_id":"vantskruv-oppen-ogla-krok-a4-m8246","title":"Turnbuckle open | eye\/hook | A4 | M8246","description":"\u003cp\u003e\u003cstrong\u003eTurnbuckle open eye\/hook (wire tensioner)\u003c\/strong\u003e in A4 stainless steel is designed for use in corrosive and marine environments. The product is used where stepless length adjustment and controlled tensioning of wire, cable, or stays are required. The version with an eye at one end and a hook at the other allows for quick assembly and disassembly in applications where one attachment point needs to be openable. The design enables precise fine-tuning of tension and length without dismantling the entire assembly. It is suitable for installations where high corrosion resistance, reliable function, and long service life are critical.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine rigging, wire systems, railing installations, building structures, and outdoor environments. It is intended for applications where adjustable wire tension, re-tightening, and precise length setting are required, such as in wire railings, stay ropes, and temporary tensioning. The eye\/hook version is used where a fixed attachment is combined with a quickly detachable connection point, such as when mounting to an eye, ring, or bolt. The material provides resistance to saltwater, moisture, and chemically aggressive environments.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Fitting\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e Turnbuckle\u003cbr\u003e\u003cstrong\u003eMaterial class:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eThread dimension:\u003c\/strong\u003e M5–M20\u003cbr\u003e\u003cstrong\u003eVersion:\u003c\/strong\u003e Eye\/hook\u003cbr\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Bright\u003cbr\u003e\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Marine\u003cbr\u003e\u003cstrong\u003eDelivery unit:\u003c\/strong\u003e Piece\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eHow does a turnbuckle with eye and hook work?\u003c\/h3\u003e\n\u003cp\u003eThe turnbuckle has a central body with threads at both ends – one right-hand threaded and one left-hand threaded. As you turn the body, the eye and hook are either drawn closer together or pushed apart simultaneously. This makes it easy to fine-tune the tension in wires, chains, or fences without rotating the wire itself.\u003c\/p\u003e\n\u003ch3\u003eWhy is the turnbuckle made of acid-proof stainless steel (A4)?\u003c\/h3\u003e\n\u003cp\u003eA4 steel (AISI 316 \/ 1.4401) is alloyed with molybdenum, providing maximum corrosion protection. This makes the turnbuckle extremely resistant to saltwater, road salt, and aggressive chemical environments. It is therefore ideal for marine installations on boats, rigs, coastal fences, and other demanding outdoor environments.\u003c\/p\u003e\n\u003ch3\u003eWhen should you choose the eye\/hook combination over two eyes or two hooks?\u003c\/h3\u003e\n\u003cp\u003eThe eye\/hook combination provides maximum flexibility during installation. The eye is attached permanently to a shackle, bolt, or fixed point where it cannot accidentally unhook, while the hook makes it quick and easy to hook and unhook the wire or chain as needed.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M5","offer_id":52973320175958,"sku":"103691","price":34.0,"currency_code":"SEK","in_stock":true},{"title":"M6","offer_id":52973320208726,"sku":"400096","price":49.0,"currency_code":"SEK","in_stock":true},{"title":"M8","offer_id":52973320241494,"sku":"400153","price":99.0,"currency_code":"SEK","in_stock":true},{"title":"M10","offer_id":52973320274262,"sku":"400155","price":159.0,"currency_code":"SEK","in_stock":true},{"title":"M12","offer_id":52973320307030,"sku":"400165","price":239.0,"currency_code":"SEK","in_stock":true},{"title":"M16","offer_id":52973320339798,"sku":"400311","price":649.0,"currency_code":"SEK","in_stock":true},{"title":"M20","offer_id":52973320372566,"sku":"400312","price":1100.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/vantskruv-oppen-oga-krok-M8246C.jpg?v=1775204549"},{"product_id":"vajerlas-enkel-a4-m8330","title":"Wire rope clip | single | A4 | M8330","description":"\u003cp\u003e\u003cstrong\u003eWire rope grip, simple model, in stainless steel A4 (AISI 316)\u003c\/strong\u003e is intended for use in marine and corrosive environments. The product is used to create and secure loops on wire rope through mechanical clamping, providing a stable and adjustable connection. Its simple design makes it easy to mount and adjust during installation. The wire rope grip provides reliable fixing of wire ends where high corrosion resistance and long service life are required.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine equipment, construction, wire rope railings, and industrial installations. It is intended for applications where wire rope is formed into loops or terminated in a safe and controlled manner, such as in bracing, railing systems, and tensioned wire rope structures. The material ensures resistance to moisture, salt, and varying climatic conditions.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Wire rope grip\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e Simple wire rope clamp\u003cbr\u003e\u003cstrong\u003eMaterial class:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-part clamp body with one screw\u003cbr\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Bright\u003cbr\u003e\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Marine \/ Outdoor\u003cbr\u003e\u003cstrong\u003eDelivery unit:\u003c\/strong\u003e Piece\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eIs this wire rope grip suitable for marine environments?\u003c\/h3\u003e\n\u003cp\u003eYes, A4 (AISI 316) provides very high corrosion resistance and is suitable for use in saltwater environments.\u003c\/p\u003e\n\u003ch3\u003eHow is the wire rope grip used correctly?\u003c\/h3\u003e\n\u003cp\u003eThe wire rope is formed into a loop, both wire parts are placed in the wire rope grip, and the screw is tightened so that the wire rope is clamped between the clamp halves.\u003c\/p\u003e\n\u003ch3\u003eCan the wire rope grip be adjusted after installation?\u003c\/h3\u003e\n\u003cp\u003eYes, the connection is demountable and can be retightened or adjusted as needed.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2mm","offer_id":53040341156182,"sku":"103059","price":7.9,"currency_code":"SEK","in_stock":true},{"title":"3mm","offer_id":53040341188950,"sku":"103060","price":8.5,"currency_code":"SEK","in_stock":true},{"title":"4mm","offer_id":53040341221718,"sku":"103061","price":10.5,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":53040341254486,"sku":"103062","price":13.0,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":53040341287254,"sku":"103063","price":28.0,"currency_code":"SEK","in_stock":true},{"title":"8mm","offer_id":53040341320022,"sku":"103064","price":32.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/vajerlas-enkel-rostfri-M8330.jpg?v=1777191029"},{"product_id":"vajerlas-dubbel-a4-m8331","title":"Wire rope grip | double | A4 | M8331","description":"\u003cp\u003e\u003cstrong\u003eDouble wire rope clamp (duplex) in A4 stainless steel (AISI 316)\u003c\/strong\u003e is intended for use in marine and corrosive environments. The product is used to create and secure loops in wire rope through mechanical clamping, providing a stable and adjustable connection. The design makes the wire rope clamp easy to assemble and adjust during installation. The wire rope clamp provides reliable fixation of wire rope ends where high corrosion resistance and long service life are required.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine equipment, construction, wire railings, and industrial installations. It is intended for applications where wire rope is formed into loops or terminated in a safe and controlled manner, for example, in bracing, railing systems, and tensioned wire constructions. The material ensures resistance to moisture, salt, and varying climate conditions.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Wire rope clamp\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e Double wire rope clamp (duplex)\u003cbr\u003e\u003cstrong\u003eMaterial grade:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e Double wire rope clamp with two screws\u003cbr\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Bright\u003cbr\u003e\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Marine \/ Outdoor\u003cbr\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e Each\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eIs this wire rope clamp suitable for marine environments?\u003c\/h3\u003e\n\u003cp\u003eYes, A4 (AISI 316) provides very high corrosion resistance and is suitable for use in saltwater environments.\u003c\/p\u003e\n\u003ch3\u003eHow is the wire rope clamp used correctly?\u003c\/h3\u003e\n\u003cp\u003eThe wire rope is formed into a loop, placed in the wire rope clamp, and secured by tightening the screws.\u003c\/p\u003e\n\u003ch3\u003eCan the wire rope clamp be adjusted after installation?\u003c\/h3\u003e\n\u003cp\u003eYes, the connection is detachable and can be retightened or adjusted if necessary.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2mm","offer_id":53040549167446,"sku":"103000","price":8.9,"currency_code":"SEK","in_stock":true},{"title":"3mm","offer_id":53040549200214,"sku":"102994","price":12.5,"currency_code":"SEK","in_stock":true},{"title":"4mm","offer_id":53040549232982,"sku":"102995","price":19.0,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":53040549265750,"sku":"102996","price":23.5,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":53040549298518,"sku":"102997","price":42.0,"currency_code":"SEK","in_stock":true},{"title":"8mm","offer_id":53040549331286,"sku":"102998","price":61.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/Vajerlas-dubbel-A4-M8331.jpg?v=1775478278"},{"product_id":"stalvajer-7x7-trad-a4","title":"Steel wire rope | 7x7 strand | A4 | DIN 3055","description":"\u003cp data-start=\"207\" data-end=\"669\"\u003e\u003cstrong\u003eStainless steel wire rope 7x7 A4 AISI 316 DIN 3055\u003c\/strong\u003e is manufactured from A4 stainless steel and intended for use in marine and corrosive environments. The construction consisting of 7 strands with 7 wires each provides a medium-stiff wire rope with good flexibility and wear resistance. The product complies with DIN 3055 and is used where a combination of flexibility, strength, and corrosion resistance is required. It is suitable for installations where reliable performance over time is essential.\u003c\/p\u003e\n\u003ch2 data-start=\"671\" data-end=\"1011\"\u003eAREA OF APPLICATION\u003c\/h2\u003e\n\u003cp data-start=\"671\" data-end=\"1011\"\u003eThe product is used in marine environments, industry, and construction. It is intended for applications such as bracing, tensioning, wire railings, and suspensions where the wire needs to be able to bend or be guided over smaller radii while maintaining good dimensional stability. The choice of material provides resistance against chlorides and aggressive atmospheres.\u003c\/p\u003e\n\u003ch2 data-start=\"1013\" data-end=\"1372\"\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp data-start=\"1013\" data-end=\"1372\"\u003e\u003cstrong data-start=\"1044\" data-end=\"1059\"\u003eProduct type:\u003c\/strong\u003e Wire rope\u003cbr data-start=\"1065\" data-end=\"1068\"\u003e\u003cstrong data-start=\"1068\" data-end=\"1081\"\u003eStandard:\u003c\/strong\u003e DIN 3055\u003cbr data-start=\"1090\" data-end=\"1093\"\u003e\u003cstrong data-start=\"1093\" data-end=\"1106\"\u003eMaterial:\u003c\/strong\u003e Stainless steel A4 AISI 316\u003cbr data-start=\"1133\" data-end=\"1136\"\u003e\u003cstrong data-start=\"1136\" data-end=\"1153\"\u003eSurface treatment:\u003c\/strong\u003e Untreated\u003cbr data-start=\"1164\" data-end=\"1167\"\u003e\u003cstrong data-start=\"1167\" data-end=\"1184\"\u003eConstruction:\u003c\/strong\u003e 7x7 wires, medium-flexible construction\u003cbr data-start=\"1223\" data-end=\"1226\"\u003e\u003cstrong data-start=\"1226\" data-end=\"1243\"\u003eFlexibility:\u003c\/strong\u003e Medium\u003cbr data-start=\"1249\" data-end=\"1252\"\u003e\u003cstrong data-start=\"1252\" data-end=\"1279\"\u003eCorrosion resistance:\u003c\/strong\u003e Very high, suitable for marine environments\u003cbr data-start=\"1318\" data-end=\"1321\"\u003e\u003cstrong data-start=\"1321\" data-end=\"1331\"\u003eLength:\u003c\/strong\u003e 100-1000 m\u003cbr data-start=\"1338\" data-end=\"1341\"\u003e\u003cstrong data-start=\"1341\" data-end=\"1357\"\u003ePackaging:\u003c\/strong\u003e Coil 100-1000 m\u003c\/p\u003e\n\u003ch2 data-start=\"1374\" data-end=\"1400\"\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003cp data-start=\"1402\" data-end=\"1562\"\u003e\u003cstrong\u003eIs this wire rope suitable for marine environments?\u003c\/strong\u003e\u003cbr data-start=\"1441\" data-end=\"1444\"\u003eYes, A4 AISI 316 provides very high corrosion resistance and is suitable for use in saltwater and coastal environments.\u003c\/p\u003e\n\u003cp data-start=\"1564\" data-end=\"1703\"\u003e\u003cstrong\u003eWhat does 7x7 construction mean?\u003c\/strong\u003e\u003cbr data-start=\"1593\" data-end=\"1596\"\u003eThe wire rope consists of 7 strands with 7 wires in each, which provides a balance between flexibility and strength.\u003c\/p\u003e\n\u003cp data-start=\"1705\" data-end=\"1876\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e\u003cstrong\u003eCan the wire rope be used for lifting?\u003c\/strong\u003e\u003cbr data-start=\"1734\" data-end=\"1737\"\u003eOnly if it is specified and certified as lifting wire rope. Standard execution according to DIN 3055 is normally used for bracing and fastening.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"1.0 \/ 250","offer_id":53299522634070,"sku":"103148","price":625.0,"currency_code":"SEK","in_stock":true},{"title":"1.5 \/ 250","offer_id":53299522732374,"sku":"103149","price":900.0,"currency_code":"SEK","in_stock":true},{"title":"1.5 \/ 500","offer_id":53299522765142,"sku":"103150","price":1750.0,"currency_code":"SEK","in_stock":false},{"title":"1.5 \/ 1000","offer_id":53299522797910,"sku":"103151","price":3100.0,"currency_code":"SEK","in_stock":false},{"title":"2.0 \/ 250","offer_id":53299522830678,"sku":"103152","price":1300.0,"currency_code":"SEK","in_stock":true},{"title":"2.0 \/ 500","offer_id":53299522863446,"sku":"103153","price":2600.0,"currency_code":"SEK","in_stock":true},{"title":"2.0 \/ 1000","offer_id":53299522896214,"sku":"103154","price":5200.0,"currency_code":"SEK","in_stock":false},{"title":"3.0 \/ 100","offer_id":53299437338966,"sku":"103155","price":1010.0,"currency_code":"SEK","in_stock":false},{"title":"3.0 \/ 250","offer_id":53299523027286,"sku":"103156","price":2850.0,"currency_code":"SEK","in_stock":true},{"title":"3.0 \/ 500","offer_id":53299523060054,"sku":"103157","price":5200.0,"currency_code":"SEK","in_stock":true},{"title":"3.0 \/ 1000","offer_id":53299523092822,"sku":"103158","price":10700.0,"currency_code":"SEK","in_stock":false},{"title":"4.0 \/ 250","offer_id":53299523125590,"sku":"103159","price":3825.0,"currency_code":"SEK","in_stock":true},{"title":"4.0 \/ 500","offer_id":53299523158358,"sku":"103160","price":7550.0,"currency_code":"SEK","in_stock":true},{"title":"4.0 \/ 1000","offer_id":53299523191126,"sku":"103161","price":15300.0,"currency_code":"SEK","in_stock":true},{"title":"5.0 \/ 250","offer_id":53299523223894,"sku":"103162","price":6075.0,"currency_code":"SEK","in_stock":true},{"title":"5.0 \/ 500","offer_id":53299523256662,"sku":"103163","price":12000.0,"currency_code":"SEK","in_stock":false},{"title":"5.0 \/ 1000","offer_id":53299523289430,"sku":"103164","price":24300.0,"currency_code":"SEK","in_stock":true},{"title":"6.0 \/ 100","offer_id":53299484655958,"sku":"103165","price":3680.0,"currency_code":"SEK","in_stock":true},{"title":"6.0 \/ 250","offer_id":53299523322198,"sku":"103166","price":8700.0,"currency_code":"SEK","in_stock":true},{"title":"6.0 \/ 500","offer_id":53299523354966,"sku":"103167","price":17400.0,"currency_code":"SEK","in_stock":true},{"title":"6.0 \/ 1000","offer_id":53299523387734,"sku":"103168","price":32600.0,"currency_code":"SEK","in_stock":true},{"title":"8.0 \/ 100","offer_id":53299484754262,"sku":"103169","price":5670.0,"currency_code":"SEK","in_stock":false},{"title":"8.0 \/ 250","offer_id":53299523420502,"sku":"103170","price":14500.0,"currency_code":"SEK","in_stock":true},{"title":"8.0 \/ 500","offer_id":53299523453270,"sku":"103171","price":29000.0,"currency_code":"SEK","in_stock":false},{"title":"10.0 \/ 100","offer_id":53299484852566,"sku":"103172","price":9900.0,"currency_code":"SEK","in_stock":false},{"title":"10.0 \/ 250","offer_id":53299523518806,"sku":"103173","price":23000.0,"currency_code":"SEK","in_stock":false},{"title":"10.0 \/ 500","offer_id":53299523551574,"sku":"103174","price":40000.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/stalvajer-7x7-M8038.jpg?v=1778250650"},{"product_id":"stalvajer-7x7-trad-pvc-belagd-a4-m8039","title":"Steel wire rope | 7x7 strand | PVC coated | A4 | M8039","description":"\u003cp data-end=\"912\" data-start=\"69\"\u003e\u003cstrong\u003eStainless steel wire rope 7x7 A4 AISI 316 DIN 3055\u003c\/strong\u003e is made of high-quality stainless steel and provided with a protective PVC coating. The wire rope's 7x7 construction (7 strands with 7 wires in each) provides an optimal balance between flexibility and tensile strength, making it suitable for applications with medium mechanical load. The PVC coating acts as an extra protective layer against external influences such as moisture, UV radiation, and abrasion. It also improves grip during handling and reduces the risk of damage to surrounding materials. The combination of A4 AISI 316 and PVC provides very high corrosion resistance, especially in marine and aggressive environments. The product meets the requirements of DIN 3055 and is intended for installations where long service life, operational reliability, and resistance to corrosion are crucial.\u003c\/p\u003e\n\u003ch2 data-end=\"1283\" data-start=\"914\"\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp data-end=\"1283\" data-start=\"914\"\u003eThe wire rope is used in marine environments, industrial applications, and construction. It is particularly suitable for bracing, tensioning, wire railings, and suspensions where flexibility is required, for example when routing over smaller radii. The PVC coating also makes it suitable where contact with sensitive surfaces occurs or where extra wear protection is needed.\u003c\/p\u003e\n\u003ch2 data-end=\"1687\" data-start=\"1285\"\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp data-end=\"1687\" data-start=\"1285\"\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e PVC-coated wire rope\u003cbr data-end=\"1347\" data-start=\"1344\"\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e DIN 3055\u003cbr data-end=\"1368\" data-start=\"1365\"\u003e\u003cstrong\u003eMaterial (core):\u003c\/strong\u003e Stainless steel A4 AISI 316\u003cbr data-end=\"1415\" data-start=\"1412\"\u003e\u003cstrong\u003eSurface treatment:\u003c\/strong\u003e PVC-coated\u003cbr data-end=\"1442\" data-start=\"1439\"\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 7x7 wires (medium flexibility)\u003cbr data-end=\"1485\" data-start=\"1482\"\u003e\u003cstrong\u003eDiameter (wire\/sheath):\u003c\/strong\u003e 3\/5 mm, 4\/6 mm and 5\/7 mm (the first dimension is the diameter of the steel wire, the second dimension is the outer diameter with the PVC sheath)\u003cbr\u003e\u003cstrong\u003eFlexibility\u003c\/strong\u003e: Medium (higher than 1x19, lower than 7x19)\u003cbr data-end=\"1538\" data-start=\"1535\"\u003e\u003cstrong\u003eCorrosion resistance:\u003c\/strong\u003e Very high, even in marine environments\u003cbr data-end=\"1598\" data-start=\"1595\"\u003e\u003cstrong\u003eProtection: \u003c\/strong\u003ePVC coating against UV, moisture, and abrasion\u003cbr data-end=\"1647\" data-start=\"1644\"\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 100–1000 m\u003cbr data-end=\"1667\" data-start=\"1664\"\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e Roll\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eIs this wire rope suitable for marine environments?\u003c\/h3\u003e\n\u003cp\u003eYes, the A4 AISI 316 core provides very high corrosion resistance, and the PVC coating provides additional protection against salt, moisture, and UV radiation.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 7x7 construction mean?\u003c\/h3\u003e\n\u003cp\u003eIt consists of 7 strands with 7 wires in each. This provides a good combination of flexibility and strength, suitable for applications with medium load.\u003c\/p\u003e\n\u003ch3\u003eWhat function does the PVC coating serve?\u003c\/h3\u003e\n\u003cp\u003eIt protects the wire rope against wear, corrosion, and external influences, as well as improves grip and handling.\u003c\/p\u003e\n\u003ch3\u003eCan the wire rope be used for lifting?\u003c\/h3\u003e\n\u003cp\u003eOnly if it is specifically certified for lifting. Standard wire rope according to DIN 3055 is normally used for bracing, fastening, and similar applications.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"3\/5 \/ 250","offer_id":53300651426134,"sku":"103175","price":3775.0,"currency_code":"SEK","in_stock":true},{"title":"3\/5 \/ 500","offer_id":53300651458902,"sku":"103176","price":7550.0,"currency_code":"SEK","in_stock":true},{"title":"3\/5 \/ 1000","offer_id":53300651491670,"sku":"103177","price":15100.0,"currency_code":"SEK","in_stock":false},{"title":"4\/6 \/ 100","offer_id":53300651524438,"sku":"103178","price":1980.0,"currency_code":"SEK","in_stock":false},{"title":"4\/6 \/ 250","offer_id":53300651557206,"sku":"103179","price":5500.0,"currency_code":"SEK","in_stock":true},{"title":"4\/6 \/ 500","offer_id":53300651589974,"sku":"103180","price":11000.0,"currency_code":"SEK","in_stock":true},{"title":"5\/7 \/ 100","offer_id":53300651655510,"sku":"103181","price":3740.0,"currency_code":"SEK","in_stock":true},{"title":"5\/7 \/ 250","offer_id":53300651688278,"sku":"103182","price":8000.0,"currency_code":"SEK","in_stock":true},{"title":"5\/7 \/ 500","offer_id":53300651721046,"sku":"103183","price":16000.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/stalvajer-7x7-PVC-A4-M8039-4x.jpg?v=1778250650"},{"product_id":"stalvajer-1x19-trad-a4-m8035","title":"Steel wire rope | 1x19 strand | A4 | DIN 3053","description":"\u003cp data-start=\"88\" data-end=\"462\"\u003eAre you looking for a reliable stainless steel wire rope for demanding environments? The 1x19 stainless steel wire rope in A4 (AISI 316) is designed for high strength, low elongation, and a long service life, even in corrosive and marine environments. The rigid 1x19 construction provides high stability and a straight, aesthetic result, making the wire rope ideal for installations where dimensional stability is crucial.\u003c\/p\u003e\n\u003ch2 data-start=\"464\" data-end=\"485\"\u003eApplications\u003c\/h2\u003e\n\u003cp data-start=\"487\" data-end=\"929\"\u003eIdeal for cable railings, bracing wires, safety lines, and other installations where high strength and low flexibility are required in construction, architecture, industry, and marine environments. The rigid 1x19 construction provides minimal elongation and a stable result, making the installation both durable and visually appealing. Suitable for both professional installations and advanced projects where corrosion resistance and long service life are essential.\u003c\/p\u003e\n\u003ch2 data-start=\"931\" data-end=\"959\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cp data-start=\"961\" data-end=\"1351\"\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Stainless steel wire rope\u003cbr data-start=\"986\" data-end=\"989\"\u003e\u003cstrong\u003eStandard: \u003c\/strong\u003eEN 12385 (wire rope standard) DIN 3053\u003cbr data-start=\"1023\" data-end=\"1026\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel A4 (AISI 316)\u003cbr data-start=\"1064\" data-end=\"1067\"\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Untreated (bright stainless surface)\u003cbr data-start=\"1111\" data-end=\"1114\"\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 1x19 wires, hard\/rigid construction\u003cbr data-start=\"1182\" data-end=\"1185\" data-is-only-node=\"\"\u003e\u003cstrong\u003eFlexibility:\u003c\/strong\u003e Low, intended for straight installations\u003cbr data-start=\"1234\" data-end=\"1237\"\u003e\u003cstrong\u003eCorrosion resistance: \u003c\/strong\u003eVery high, suitable for marine environments\u003cbr data-start=\"1299\" data-end=\"1302\"\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e100–1000m\u003cbr data-start=\"1318\" data-end=\"1321\"\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003eCoil\u003c\/p\u003e\n\u003ch2 data-start=\"62\" data-end=\"69\"\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003cp data-start=\"71\" data-end=\"475\"\u003e\u003cstrong data-start=\"71\" data-end=\"143\"\u003eWhat is the advantage of 1x19 construction compared to 7x7 or 7x19?\u003c\/strong\u003e\u003cbr data-start=\"143\" data-end=\"146\"\u003e1x19 consists of 19 wires in a single strand, which results in a very rigid wire rope with minimal elongation. It is suitable for straight installations such as railings and bracing where dimensional stability is important. Unlike 7x7 and 7x19, it has significantly lower flexibility and is therefore not suitable for applications involving bends or moving parts.\u003c\/p\u003e\n\u003cp data-start=\"477\" data-end=\"857\"\u003e\u003cstrong data-start=\"477\" data-end=\"533\"\u003eIs A4 (AISI 316) sufficient for marine environments?\u003c\/strong\u003e\u003cbr data-start=\"533\" data-end=\"536\"\u003eYes, AISI 316 contains molybdenum, which provides high resistance to chlorides and salt water. It is the standard choice for marine environments and outdoor applications with high corrosion stress. For extreme environments (e.g., constant submersion or chemically aggressive environments), additional material choices or inspection may be required.\u003c\/p\u003e\n\u003cp data-start=\"859\" data-end=\"1230\"\u003e\u003cstrong data-start=\"859\" data-end=\"915\"\u003eCan the wire rope be cut and mounted with standard fittings?\u003c\/strong\u003e\u003cbr data-start=\"915\" data-end=\"918\"\u003eYes, the wire rope can be cut using wire rope cutters or a cutting tool intended for stainless steel wire to prevent fraying. It is compatible with swage sleeves, terminals, and other fittings designed for 1x19 construction. For best results, A4 (AISI 316) fittings are recommended to maintain corrosion resistance throughout the system.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"1.0 \/ 250","offer_id":53301689680214,"sku":"103184","price":600.0,"currency_code":"SEK","in_stock":true},{"title":"1.0 \/ 500","offer_id":53301689712982,"sku":"103185","price":1150.0,"currency_code":"SEK","in_stock":true},{"title":"1.0 \/ 1000","offer_id":53301689745750,"sku":"103186","price":2400.0,"currency_code":"SEK","in_stock":true},{"title":"1.5 \/ 250","offer_id":53301689811286,"sku":"103187","price":1050.0,"currency_code":"SEK","in_stock":true},{"title":"1.5 \/ 500","offer_id":53301689844054,"sku":"103188","price":2050.0,"currency_code":"SEK","in_stock":false},{"title":"1.5 \/ 1000","offer_id":53301689876822,"sku":"103189","price":4300.0,"currency_code":"SEK","in_stock":true},{"title":"2.0 \/ 250","offer_id":53301689942358,"sku":"103190","price":1675.0,"currency_code":"SEK","in_stock":true},{"title":"2.0 \/ 500","offer_id":53301689975126,"sku":"103191","price":3250.0,"currency_code":"SEK","in_stock":true},{"title":"2.5 \/ 250","offer_id":53301690073430,"sku":"103192","price":2200.0,"currency_code":"SEK","in_stock":true},{"title":"2.5 \/ 500","offer_id":53301690106198,"sku":"103193","price":4300.0,"currency_code":"SEK","in_stock":true},{"title":"3.0 \/ 250","offer_id":53301690204502,"sku":"103194","price":3625.0,"currency_code":"SEK","in_stock":true},{"title":"3.0 \/ 500","offer_id":53301690237270,"sku":"103195","price":7150.0,"currency_code":"SEK","in_stock":true},{"title":"3.0 \/ 1000","offer_id":53301690270038,"sku":"103196","price":1300.0,"currency_code":"SEK","in_stock":true},{"title":"4.0 \/ 250","offer_id":53301690335574,"sku":"103197","price":5500.0,"currency_code":"SEK","in_stock":true},{"title":"4.0 \/ 500","offer_id":53301690368342,"sku":"103198","price":11000.0,"currency_code":"SEK","in_stock":true},{"title":"4.0 \/ 1000","offer_id":53301690401110,"sku":"103199","price":22100.0,"currency_code":"SEK","in_stock":true},{"title":"5.0 \/ 250","offer_id":53301609464150,"sku":"103200","price":8250.0,"currency_code":"SEK","in_stock":true},{"title":"5.0 \/ 500","offer_id":53301690433878,"sku":"103201","price":16500.0,"currency_code":"SEK","in_stock":true},{"title":"5.0 \/ 1000","offer_id":53301690466646,"sku":"103202","price":31000.0,"currency_code":"SEK","in_stock":true},{"title":"6.0 \/ 250","offer_id":53301609529686,"sku":"103204","price":14000.0,"currency_code":"SEK","in_stock":true},{"title":"6.0 \/ 500","offer_id":53301690499414,"sku":"103205","price":27750.0,"currency_code":"SEK","in_stock":false},{"title":"6.0 \/ 100","offer_id":53301609496918,"sku":"103203","price":5300.0,"currency_code":"SEK","in_stock":true},{"title":"7.0 \/ 100","offer_id":53305137889622,"sku":"103213","price":6900.0,"currency_code":"SEK","in_stock":true},{"title":"8.0 \/ 250","offer_id":53301609595222,"sku":"103207","price":18750.0,"currency_code":"SEK","in_stock":true},{"title":"8.0 \/ 500","offer_id":53301690564950,"sku":"103208","price":34000.0,"currency_code":"SEK","in_stock":true},{"title":"8.0 \/ 1000","offer_id":53301690597718,"sku":"103209","price":68000.0,"currency_code":"SEK","in_stock":true},{"title":"8.0 \/ 100","offer_id":53301609562454,"sku":"103206","price":6900.0,"currency_code":"SEK","in_stock":true},{"title":"10.0 \/ 250","offer_id":53301690663254,"sku":"103211","price":33250.0,"currency_code":"SEK","in_stock":true},{"title":"10.0 \/ 100","offer_id":53301690630486,"sku":"103210","price":13400.0,"currency_code":"SEK","in_stock":true},{"title":"12.0 \/ 100","offer_id":53301690761558,"sku":"103212","price":20200.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/stalvajer-1x19-M8035.jpg?v=1778250648"},{"product_id":"vajerlas-bygel-a4-din-741","title":"Wire rope clip | A4 | DIN 741","description":"\u003cp\u003e\u003cstrong\u003eWire rope clips with U-bolt in A4\u003c\/strong\u003e are intended for use in marine and corrosive environments where secure fastening of steel wire rope is required. The product complies with DIN 741 and is used where mechanical locking of wire rope ends or loops is needed. It is suitable for professional installations where long service life and consistent performance are essential.\u003c\/p\u003e\n\u003ch2\u003eAREA OF APPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine, industrial, and outdoor applications. It is intended for applications where wire rope is to be locked or formed into loops and where the choice of material provides the necessary protection against corrosion and mechanical stress.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Wire rope clip\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e U-bolt wire rope clip\u003cbr\u003e\u003cstrong\u003eMaterial class:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class\u003c\/strong\u003e: Not specified\u003cbr\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 741\u003cbr\u003e\u003cstrong\u003eDesign\u003c\/strong\u003e: U-bolt with saddle and nut\u003cbr\u003e\u003cstrong\u003eSurface finish\u003c\/strong\u003e: Bright\u003cbr\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e: Marine\u003cbr\u003e\u003cstrong\u003eDelivery unit\u003c\/strong\u003e: Each\u003c\/p\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow is a wire rope clip correctly mounted?\u003c\/strong\u003e\u003cbr\u003eThe wire rope clip is mounted with the saddle against the load-bearing part of the wire and the U-bolt over the dead end. The nuts are tightened evenly to ensure correct clamping force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many wire rope clips are needed per attachment?\u003c\/strong\u003e\u003cbr\u003eThe number depends on the load and safety requirements, but at least two to three wire rope clips are typically used to create a secure connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan A4 wire rope clips be used in saltwater environments?\u003c\/strong\u003e\u003cbr\u003eYes, A4 (AISI 316) is acid-proof stainless steel with high corrosion resistance and is suitable for marine environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo wire rope clips need to be retightened after installation?\u003c\/strong\u003e\u003cbr\u003eYes, after initial loading, the nuts should be retightened as the wire rope may settle and reduce the clamping force.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2mm","offer_id":53372837036374,"sku":"103224","price":10.5,"currency_code":"SEK","in_stock":true},{"title":"3mm","offer_id":53372837069142,"sku":"103225","price":12.0,"currency_code":"SEK","in_stock":true},{"title":"4mm","offer_id":53372837101910,"sku":"103226","price":14.0,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":53372837134678,"sku":"103227","price":16.0,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":53372837167446,"sku":"103228","price":19.5,"currency_code":"SEK","in_stock":true},{"title":"8mm","offer_id":53372837200214,"sku":"103229","price":25.0,"currency_code":"SEK","in_stock":true},{"title":"10mm","offer_id":53373129195862,"sku":"103230","price":44.0,"currency_code":"SEK","in_stock":true},{"title":"12mm","offer_id":53373129228630,"sku":"103231","price":97.0,"currency_code":"SEK","in_stock":true},{"title":"14mm","offer_id":53790907236694,"sku":"103252","price":119.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/vajerlas-bygel-A4-DIN741.jpg?v=1778250637"},{"product_id":"vajerlas-med-stoppskruv-a4-m8427","title":"Wire rope grip with set screw | A4 | M8427","description":"\u003cp\u003e\u003cstrong\u003eWire rope grip with set screw\u003c\/strong\u003e in A4 is intended for use in applications where wire rope needs to be fixed in a specific position. The product is used where adjustable positioning and mechanical locking are required. It is suitable for professional installations where long service life and consistent performance are critical.\u003c\/p\u003e\n\u003ch2\u003eAREA OF APPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine environments, interior design systems, and lighter constructions. It is intended for applications where wire rope is to be locked into position and where the choice of material provides the necessary protection against corrosion and mechanical stress.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Fitting\u003cbr\u003e\u003cstrong\u003eProduct family:\u003c\/strong\u003e Wire rope grip with set screw\u003cbr\u003e\u003cstrong\u003eMaterial grade:\u003c\/strong\u003e A4\u003cbr\u003e\u003cstrong\u003eStrength class:\u003c\/strong\u003e Not specified\u003cbr\u003e\u003cstrong\u003eDrive type:\u003c\/strong\u003e Hex socket\u003cbr\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e With set screw\u003cbr\u003e\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Marine \/ Outdoor\u003cbr\u003e\u003cstrong\u003eUnit of delivery:\u003c\/strong\u003e Piece\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow is a wire rope grip with set screw mounted?\u003c\/strong\u003e\u003cbr\u003eThe wire rope is inserted through the through-hole of the grip. The set screw is then tightened with a hex key until the wire rope is fixed in the desired position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the wire rope grip be reused?\u003c\/strong\u003e\u003cbr\u003eYes, the set screw design allows for disassembly and readjustment without damaging the wire rope when tightened correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the product suitable for lifting applications?\u003c\/strong\u003e\u003cbr\u003eNo, this type of wire rope grip is intended for positioning and fixation, not for load-bearing lifting or safety-critical loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat environment is A4 material suitable for?\u003c\/strong\u003e\u003cbr\u003eA4 (acid-proof stainless steel) is suitable for marine and outdoor environments where high corrosion resistance is required.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2mm","offer_id":53388315066710,"sku":"103232","price":28.0,"currency_code":"SEK","in_stock":true},{"title":"3mm","offer_id":53388315099478,"sku":"103233","price":29.0,"currency_code":"SEK","in_stock":true},{"title":"4mm","offer_id":53388315132246,"sku":"103234","price":30.0,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":53388315165014,"sku":"103235","price":34.0,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":53388315197782,"sku":"103236","price":41.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/Vajerlasmedstoppskruv-M8427.jpg?v=1779622788"},{"product_id":"vantskruv-svetsad-gaffel-terminal-a4-m8275","title":"Welded stud bolt | fork\/terminal | A4 | M8275","description":"\u003cp\u003e\u003cstrong\u003eShackle screw welded fork\/terminal in A4 stainless steel\u003c\/strong\u003e, also called wire rope tensioner with crimp terminal, shackle tensioner or tension screw fork\/terminal, is intended for use in corrosive and marine environments. One end has a fork with a removable rigging bolt and the other a terminal that is crimped (rolled) directly onto the wire rope. The product is used where stepless tensioning of wire rope is required without wire rope clips or thimbles. It is suitable for professional installations where long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine rigging, bow and stern rails on boats, wire rope railings, stays and load-bearing wire rope structures in building and outdoor environments. It is intended for applications where a wire rope is to be tensioned and terminated in the same component and where the material choice provides the necessary protection against corrosion and mechanical stress. Available for wire rope 2.5–12 mm with thread M5–M20. The terminal part fits wire rope 1x19, 7x7 and 7x19.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Shackle screw (wire rope tensioner, shackle tensioner, tension screw)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Fork\/terminal, welded fork, crimp terminal for wire rope\u003c\/li\u003e\n\n\u003cli\u003eThread size: M5–M20\u003c\/li\u003e\n\n\u003cli\u003eWire rope size: 2.5–12 mm\u003c\/li\u003e\n\n\u003cli\u003eSurface finish: Bright\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eHow is the terminal part mounted on the wire rope?\u003c\/h3\u003e\n\u003cp\u003eThe terminal part is pressed or rolled onto the wire rope with a hydraulic press bar and press dies for the correct wire rope size. For 5 mm wire rope, the terminal has an outer diameter of 9.0 mm before pressing. On PVC-coated wire rope, the coating must be stripped where the terminal is pressed.\u003c\/p\u003e\n\u003ch3\u003eWhich wire rope size fits which thread?\u003c\/h3\u003e\n\u003cp\u003e2.5 mm wire rope fits M5, 3 mm M6, 4 mm M8, 5 mm M10, 6 mm M12, 8 mm M16 and 10–12 mm M20. Choose the variant according to the wire rope's steel core, not by the outer diameter of a PVC-coated wire rope.\u003c\/p\u003e\n\u003ch3\u003eWhat can the fork be attached to?\u003c\/h3\u003e\n\u003cp\u003eThe fork is attached with its rigging bolt to an eye, a mounting eye, a shackle plate or an eye screw. Check that the rigging bolt fits through the hole and that the material fits in the fork opening.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2.5mm \/ M5","offer_id":55954517721430,"sku":"400320","price":70.1,"currency_code":"SEK","in_stock":true},{"title":"3mm \/ M6","offer_id":55954517754198,"sku":"400321","price":81.7,"currency_code":"SEK","in_stock":true},{"title":"4mm \/ M8","offer_id":55954517786966,"sku":"400322","price":118.2,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M10","offer_id":55954517819734,"sku":"400323","price":176.6,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M12","offer_id":55954517852502,"sku":"400324","price":280.8,"currency_code":"SEK","in_stock":true},{"title":"8mm \/ M16","offer_id":55954517885270,"sku":"400325","price":641.1,"currency_code":"SEK","in_stock":true},{"title":"10mm \/ M20","offer_id":55954517918038,"sku":"400326","price":1007.4,"currency_code":"SEK","in_stock":true},{"title":"12mm \/ M20","offer_id":55954517950806,"sku":"400327","price":1229.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/M8275_kvadrat_1700.jpg?v=1793025414"},{"product_id":"gangterminal-pressad-med-mutter-a4-m8320","title":"Pressed stud fitting | right-hand thread with nut | A4 | M8320","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Pressed terminal – requires pressing tools (hand press, hydraulic press, or rolling machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Want to install it yourself on 1×19 wire? See \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-1x19-a4-m8326\"\u003eThreaded terminal press-free DIY | for 1x19 wire | A4 | M8326\u003c\/a\u003e or all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRIGHT-HAND THREAD:\u003c\/strong\u003e This terminal has a right-hand thread. If the wire is to be tensioned with a turnbuckle body, a pair is required: a right-hand and a left-hand terminal in the same size. See \u003ca href=\"\/en\/products\/gangterminal-pressad-vansterganga-med-mutter-a4-m8620\"\u003ePressed threaded terminal | left-hand thread with nut | A4 | M8620\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePressed threaded terminal with nut in A4 stainless steel, also known as a rolled threaded terminal, pressed terminal with thread, or stud terminal, is intended for use in corrosive and marine environments. The terminal is pressed (rolled) onto the wire and has an external right-hand thread with a nut at the other end. The product is used where a wire needs to be anchored through a hole in a post or fitting, or tensioned via the thread. It is suitable for professional installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine rigging, bow and stern rails on boats, wire railings and balustrades in building and garden environments, stays, barriers, and suspensions. It is intended for applications where the wire needs to be terminated with a threaded end and where the material choice provides the necessary protection against corrosion and mechanical stress. Available for 2–12 mm wire with M4–M20 thread. Fits 1x19, 7x7, and 7x19 wire.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (threaded terminal, pressed terminal, rolled terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: External right-hand thread with nut\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Pressed\/rolled on with pressing tools (not press-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eThread size: M4–M20\u003c\/li\u003e\n\n\u003cli\u003eWire size: 2–12 mm\u003c\/li\u003e\n\n\u003cli\u003eSurface finish: Electropolished\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eDo I need a right-hand or left-hand thread?\u003c\/h3\u003e\n\u003cp\u003eFor anchoring through a post with a nut, a right-hand thread is sufficient. If the wire is to be tensioned with an open or closed turnbuckle body, which has a right-hand thread at one end and a left-hand thread at the other, a right-hand terminal (M8320) and a \u003ca href=\"\/en\/products\/gangterminal-pressad-vansterganga-med-mutter-a4-m8620\"\u003eleft-hand terminal (M8620)\u003c\/a\u003e in the same size are required.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a pressed and a press-free (DIY) threaded terminal?\u003c\/h3\u003e\n\u003cp\u003eA pressed threaded terminal has a smooth sleeve that is clamped onto the wire with pressing tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A press-free DIY terminal has a cone and is installed with standard wrenches, but only fits 1×19 wire; see \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-1x19-a4-m8326\"\u003eM8326\u003c\/a\u003e. This product is pressed.\u003c\/p\u003e\n\u003ch3\u003eCan you press the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a press-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eHow is a pressed threaded terminal installed?\u003c\/h3\u003e\n\u003cp\u003eThe terminal is pressed or rolled onto the wire with pressing tools and press dies for the correct wire size. When pressed correctly, up to 80% of the wire's minimum breaking load is achieved. The terminal can be extended by up to 10% during pressing.\u003c\/p\u003e\n\u003ch3\u003eIs the thread long enough to go through a post?\u003c\/h3\u003e\n\u003cp\u003eThe nut can be unscrewed so that the terminal can be inserted through the post and tightened on the other side. Allow for the post's material thickness plus washer and nut. Example: 5 mm\/M10 has 63 mm of thread, which is enough for a 50 mm post with a washer and low-profile lock nut.\u003c\/p\u003e\n\u003ch3\u003eWhich wire size fits which thread?\u003c\/h3\u003e\n\u003cp\u003e2 mm wire fits M4, 2.5 mm M5, 3 mm M6, 4 mm M6 or M8, 5 mm M8 or M10, 6 mm M10 or M12, 8 mm M12 or M16, 10 mm M16 or M20, and 12 mm M20. Choose according to the wire's steel core, not the outer diameter of PVC-coated wire.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, providing better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2mm \/ M4","offer_id":55954519359830,"sku":"400328","price":24.7,"currency_code":"SEK","in_stock":false},{"title":"2.5mm \/ M5","offer_id":55954519392598,"sku":"400329","price":16.8,"currency_code":"SEK","in_stock":true},{"title":"3mm \/ M6","offer_id":55954519425366,"sku":"400330","price":21.2,"currency_code":"SEK","in_stock":true},{"title":"4mm \/ M6","offer_id":55954519458134,"sku":"400331","price":25.1,"currency_code":"SEK","in_stock":true},{"title":"4mm \/ M8","offer_id":55954519490902,"sku":"400332","price":24.2,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M8","offer_id":55954519523670,"sku":"400333","price":36.7,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M10","offer_id":55954519556438,"sku":"400334","price":46.1,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M10","offer_id":55954519589206,"sku":"400335","price":70.2,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M12","offer_id":55954519621974,"sku":"400336","price":92.5,"currency_code":"SEK","in_stock":true},{"title":"8mm \/ M12","offer_id":55954519654742,"sku":"400337","price":138.5,"currency_code":"SEK","in_stock":true},{"title":"8mm \/ M16","offer_id":55954519687510,"sku":"400338","price":157.4,"currency_code":"SEK","in_stock":true},{"title":"10mm \/ M16","offer_id":55954519720278,"sku":"400339","price":215.8,"currency_code":"SEK","in_stock":true},{"title":"10mm \/ M20","offer_id":55954519753046,"sku":"400340","price":236.0,"currency_code":"SEK","in_stock":true},{"title":"12mm \/ M20","offer_id":55954519785814,"sku":"400341","price":366.3,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-swage-stud-terminal-right-hand-thread-m8320.jpg?v=1793176486"},{"product_id":"gaffelterminal-pressad-svetsad-a4-m8316","title":"Fork terminal pressed | welded | A4 | M8316","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Pressed terminal – requires pressing tools (hand press, hydraulic press or rolling machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Do you want to install it yourself on 1×19 wire? See \u003ca href=\"\/en\/products\/gaffelterminal-pressfri-diy-1x19-a4-m8323\"\u003eFork terminal press-free DIY | for 1x19 wire | A4 | M8323\u003c\/a\u003e or all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWELDED – not turned:\u003c\/strong\u003e On this model, the fork is welded onto the press sleeve. It is the affordable standard choice for wire railings, gardens and general rigging, and is available in most sizes (2–12 mm wire). If you are looking for a version without a welded joint, see \u003ca href=\"\/en\/products\/gaffelterminal-pressad-svarvad-a4-m8316mt\"\u003ePressed fork terminal | turned | A4 | M8316MT\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressed fork terminal welded in A4 stainless steel\u003c\/strong\u003e, also called fork terminal for wire, press terminal with fork, rolling terminal fork or fork terminal, is intended for use in corrosive and marine environments. The terminal is pressed (rolled) onto the wire end and has a fork with a removable bolt at the other end. The product is used where a wire needs to be attached to a mounting eye, turnbuckle plate, loop or turnbuckle screw and be able to be released by pulling out the bolt. It is suitable for professional installations where a long lifespan and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in wire railings and balustrades, gardens and landscaping, barriers, suspensions and marine rigging. It is intended for applications where the wire needs to be terminated with a fork and where the material choice provides the necessary protection against corrosion and mechanical stress. Available for 2, 3, 4, 5, 6, 8, 10 and 12 mm wire.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (fork terminal, press terminal fork, rolling terminal, fork terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial class: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Welded fork with removable bolt, press sleeve for wire\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Pressed\/rolled on with pressing tools (not press-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eWire size: 2–12 mm\u003c\/li\u003e\n\n\u003cli\u003eSurface finish: Bright, electropolished\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between a pressed and a press-free (DIY) fork terminal?\u003c\/h3\u003e\n\u003cp\u003eA pressed fork terminal has a smooth sleeve that is clamped onto the wire with pressing tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A press-free DIY terminal has a cone and thread and is installed with standard wrenches, but only fits 1×19 wire, see \u003ca href=\"\/en\/products\/gaffelterminal-pressfri-diy-1x19-a4-m8323\"\u003eM8323\u003c\/a\u003e. This product is pressed.\u003c\/p\u003e\n\u003ch3\u003eCan I install the terminal myself?\u003c\/h3\u003e\n\u003cp\u003eOnly if you have access to pressing tools with pressing dies for the correct wire size. Otherwise, a rigger or wire workshop should press it, or you can choose a press-free DIY terminal.\u003c\/p\u003e\n\u003ch3\u003eCan you press the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a press-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWelded or turned fork terminal – what is the difference and which should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe welded fork terminal (M8316) has the fork welded onto the press sleeve, is electropolished and is available for 2–12 mm wire at a lower price. The turned fork terminal (M8316MT) is turned and has no welded joint between the fork and sleeve. It is available for 4–8 mm wire and is often chosen where appearance is important. Both are pressed in the same way. See \u003ca href=\"\/en\/products\/gaffelterminal-pressad-svarvad-a4-m8316mt\"\u003eturned fork terminal M8316MT\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow strong will the press be?\u003c\/h3\u003e\n\u003cp\u003eAccording to the manufacturer, up to 60% of the wire's minimum breaking load is achieved with correct pressing or rolling. Therefore, size according to the wire's breaking load with a suitable safety factor.\u003c\/p\u003e\n\u003ch3\u003eDoes the length change when the terminal is pressed?\u003c\/h3\u003e\n\u003cp\u003eYes, the terminal's total length (L1) can be extended by up to 10% during pressing. Take this into account when determining the wire length.\u003c\/p\u003e\n\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\n\u003cp\u003eChoose the variant according to the wire's nominal diameter, i.e., the steel core and not the outer diameter of a PVC-coated wire. Also check the bolt diameter (D) and fork opening (A) against the mount, see the dimension drawing.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2mm","offer_id":56224968409430,"sku":"400342","price":23.8,"currency_code":"SEK","in_stock":true},{"title":"3mm","offer_id":56224968442198,"sku":"400343","price":27.9,"currency_code":"SEK","in_stock":true},{"title":"4mm","offer_id":56224968474966,"sku":"400344","price":45.5,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":56224968507734,"sku":"400345","price":79.9,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":56224968540502,"sku":"400346","price":134.9,"currency_code":"SEK","in_stock":false},{"title":"8mm","offer_id":56224968573270,"sku":"400347","price":298.5,"currency_code":"SEK","in_stock":true},{"title":"10mm","offer_id":56224968606038,"sku":"400348","price":370.7,"currency_code":"SEK","in_stock":true},{"title":"12mm","offer_id":56224968638806,"sku":"400349","price":613.6,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-svetsad-gaffelterminal-a4-rostfritt-stal-m8316.jpg?v=1793176304"},{"product_id":"gaffelterminal-pressad-svarvad-a4-m8316mt","title":"Fork terminal pressed | turned | A4 | M8316MT","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Crimp terminal – requires crimping tools (hand crimper, hydraulic press or rolling machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Do you want to install it yourself on 1×19 wire? See \u003ca href=\"\/en\/products\/gaffelterminal-pressfri-diy-1x19-a4-m8323\"\u003eFork terminal crimp-free DIY | for 1x19 wire | A4 | M8323\u003c\/a\u003e or all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMACHINED – not welded:\u003c\/strong\u003e In this model, the fork and crimp sleeve are machined, without a welded joint between the fork and sleeve. It is often chosen for visible installations where a smooth, uniform appearance is important. Available for 4–8 mm wire. If you are looking for the affordable standard version or sizes 2, 3, 10 and 12 mm, see \u003ca href=\"\/en\/products\/gaffelterminal-pressad-svetsad-a4-m8316\"\u003eFork terminal crimped | welded | A4 | M8316\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFork terminal crimped machined in A4 stainless steel\u003c\/strong\u003e, also called machined fork terminal for wire, crimp terminal with fork, rolling terminal fork or fork terminal, is intended for use in corrosive and marine environments. The terminal is crimped (rolled) onto the wire end and has a fork with a removable bolt at the other end. The product is used where a wire needs to be attached to a mounting eye, turnbuckle plate, loop or turnbuckle screw and be able to be released by removing the bolt. It is suitable for professional installations where long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in wire railings in architecture and interior design, facades, ship railings and boat railings, marine rigging and barriers. It is intended for applications where the wire needs to be terminated with a fork and where the material choice provides the necessary protection against corrosion and mechanical stress. Available for 4, 5, 6 and 8 mm wire.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (fork terminal, crimp terminal fork, rolling terminal, fork terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Machined fork without welded joint, with removable bolt and crimp sleeve for wire\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Crimped\/rolled with crimping tools (not crimp-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eWire size: 4–8 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWelded or machined fork terminal – what is the difference and which should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe machined fork terminal (M8316MT) is machined and has no welded joint between the fork and sleeve. It is available for 4–8 mm wire and is often chosen where appearance is important. The welded fork terminal (M8316) has the fork welded onto the crimp sleeve, is electropolished and is available for 2–12 mm wire at a lower price. Both are crimped in the same way. See \u003ca href=\"\/en\/products\/gaffelterminal-pressad-svetsad-a4-m8316\"\u003ewelded fork terminal M8316\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the same fittings as the welded model?\u003c\/h3\u003e\n\u003cp\u003eYes. For 4–8 mm wire, both models have the same bolt diameter (D), fork opening (A) and height (H). The crimp sleeve diameter and length differ slightly, see the dimension drawing.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between crimped and crimp-free (DIY) fork terminal?\u003c\/h3\u003e\n\u003cp\u003eA crimped fork terminal has a smooth sleeve that is clamped onto the wire with crimping tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A crimp-free DIY terminal has a cone and thread and is installed with standard wrenches, but only fits 1×19 wire, see \u003ca href=\"\/en\/products\/gaffelterminal-pressfri-diy-1x19-a4-m8323\"\u003eM8323\u003c\/a\u003e. This product is crimped.\u003c\/p\u003e\n\u003ch3\u003eCan I install the terminal myself?\u003c\/h3\u003e\n\u003cp\u003eOnly if you have access to crimping tools with crimping dies for the correct wire size. Otherwise, a rigger or wire workshop should crimp it, or you can choose a crimp-free DIY terminal.\u003c\/p\u003e\n\u003ch3\u003eCan you crimp the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a crimp-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\n\u003cp\u003eChoose the variant according to the wire's nominal diameter, i.e., the steel core and not the outer diameter of a PVC-coated wire. Also check the bolt diameter (D) and fork opening (A) against the fitting, see the dimension drawing.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"4mm","offer_id":56224972210518,"sku":"400350","price":156.1,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":56224972243286,"sku":"400351","price":207.5,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":56224972276054,"sku":"400352","price":356.7,"currency_code":"SEK","in_stock":true},{"title":"8mm","offer_id":56224972308822,"sku":"400353","price":867.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-turned-fork-terminal-a4-stainless-steel-m8316mt.jpg?v=1793176114"},{"product_id":"gangterminal-pressad-vansterganga-med-mutter-a4-m8620","title":"Pressed thread terminal | left-hand thread with nut | A4 | M8620","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Crimp terminal – requires crimping tools (hand crimper, hydraulic press or swaging machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Want to install it yourself? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ecrimp-free DIY terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEFT-HAND THREAD:\u003c\/strong\u003e This terminal has a left-hand thread and is used in pairs with a right-hand thread terminal of the same size, so that the wire is tensioned when a turnbuckle body with right- and left-hand threads is turned. See \u003ca href=\"\/en\/products\/gangterminal-pressad-med-mutter-a4-m8320\"\u003eCrimp thread terminal | right-hand thread with nut | A4 | M8320\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrimp thread terminal with left-hand thread and nut in A4 stainless steel\u003c\/strong\u003e, also called swaged left-hand thread terminal, crimp terminal with left-hand thread or stud terminal LH, is intended for use in corrosive and marine environments. The terminal is crimped (swaged) onto the wire and has an external left-hand thread with a nut at the other end. The product is used where a wire needs to be tensioned with a turnbuckle body together with a right-hand thread terminal. It is suitable for professional installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp\u003eThe product is used in marine rigging, bow and stern rails on boats, wire railings and balustrades in building and garden environments, stays and barriers where the wire is tensioned with a turnbuckle body. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available for 2–10 mm wire with M4–M16 left-hand threads.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (thread terminal, crimp terminal, swaged terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: External left-hand thread (LH) with nut\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Crimped\/swaged on with crimping tools (not crimp-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: M4–M16 left-hand thread\u003c\/li\u003e\n\n\u003cli\u003eWire dimension: 2–10 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhen do I need a left-hand thread?\u003c\/h3\u003e\n\u003cp\u003eWhen the wire is to be tensioned with an open or closed turnbuckle body. The body has a right-hand thread at one end and a left-hand thread at the other, so you need a right-hand thread terminal (\u003ca href=\"\/en\/products\/gangterminal-pressad-med-mutter-a4-m8320\"\u003eM8320\u003c\/a\u003e) and a left-hand thread terminal (M8620) of the same size. Two left-hand thread terminals do not work in the same body.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a crimped and a crimp-free (DIY) thread terminal?\u003c\/h3\u003e\n\u003cp\u003eA crimped thread terminal has a smooth sleeve that is clamped onto the wire with crimping tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A crimp-free DIY terminal has a cone and is installed with standard wrenches. This product is crimped.\u003c\/p\u003e\n\u003ch3\u003eCan you crimp the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a crimp-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhich wire dimension fits which thread?\u003c\/h3\u003e\n\u003cp\u003e2 mm wire fits M4, 3 mm M6, 4 mm M6 or M8, 5 mm M8 or M10, 6 mm M10 or M12, 8 mm M12 or M16 and 10 mm M16. Choose the same size as the right-hand thread terminal and according to the wire's steel core, not the outer diameter of the PVC-coated wire.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2mm \/ M4","offer_id":56226822750550,"sku":"400354","price":22.3,"currency_code":"SEK","in_stock":true},{"title":"3mm \/ M6","offer_id":56226822783318,"sku":"400355","price":24.0,"currency_code":"SEK","in_stock":true},{"title":"4mm \/ M6","offer_id":56226822816086,"sku":"400356","price":26.2,"currency_code":"SEK","in_stock":true},{"title":"4mm \/ M8","offer_id":56226822848854,"sku":"400357","price":26.2,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M8","offer_id":56226822881622,"sku":"400358","price":31.3,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M10","offer_id":56226822914390,"sku":"400359","price":33.2,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M10","offer_id":56226822947158,"sku":"400360","price":75.6,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M12","offer_id":56226822979926,"sku":"400361","price":78.1,"currency_code":"SEK","in_stock":true},{"title":"8mm \/ M12","offer_id":56226823012694,"sku":"400362","price":138.9,"currency_code":"SEK","in_stock":true},{"title":"8mm \/ M16","offer_id":56226823045462,"sku":"400363","price":193.5,"currency_code":"SEK","in_stock":true},{"title":"10mm \/ M16","offer_id":56226823078230,"sku":"400364","price":245.5,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-swage-stud-terminal-left-hand-thread.jpg?v=1793171702"},{"product_id":"ogleterminal-pressad-a4-m8317","title":"Pressed loop terminal | A4 | M8317","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Crimp terminal – requires crimping tools (hand crimper, hydraulic press or swaging machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Do you want to install it yourself on 1×19 wire? See \u003ca href=\"\/en\/products\/ogleterminal-pressfri-diy-1x19-a4-m8322\"\u003eEye terminal press-free DIY | for 1x19 wire | A4 | M8322\u003c\/a\u003e or all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEye terminal crimped in A4 stainless steel\u003c\/strong\u003e, also called crimp terminal with eye, swaged eye terminal or swage eye terminal, is intended for use in corrosive and marine environments. The terminal is crimped (swaged) onto the wire end and has a flat eye with a hole at the other end. The product is used where a wire needs to be attached to a fork, a fork shackle, a shackle or an eye bolt. It is suitable for professional installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in wire railings and balustrades, marine rigging, mooring lines, stays, barriers and suspensions. It is intended for applications where the wire needs to be terminated with an eye and where the material choice provides the necessary protection against corrosion and mechanical stress. Available for 2.5, 3, 4, 5, 6, 8, 10 and 12 mm wire.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (eye terminal, crimp eye terminal, swaged terminal, swage eye)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Flat eye with hole, crimp sleeve for wire\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Crimped\/swaged with crimping tools (not press-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eWire size: 2.5–12 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between an eye terminal and a fork terminal?\u003c\/h3\u003e\n\u003cp\u003eThe eye terminal has a flat eye that is attached to something with a fork or bolt, for example a fork shackle or a shackle. The fork terminal has a fork with a bolt and is attached around an eye or an eye bolt. See \u003ca href=\"\/en\/products\/gaffelterminal-pressad-svetsad-a4-m8316\"\u003eFork terminal crimped | welded | A4 | M8316\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a crimped and a press-free (DIY) eye terminal?\u003c\/h3\u003e\n\u003cp\u003eA crimped eye terminal has a smooth sleeve that is clamped onto the wire with crimping tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A press-free DIY terminal has a cone and thread and is installed with standard wrenches, but only fits 1×19 wire, see \u003ca href=\"\/en\/products\/ogleterminal-pressfri-diy-1x19-a4-m8322\"\u003eM8322\u003c\/a\u003e. This product is crimped.\u003c\/p\u003e\n\u003ch3\u003eCan I install the terminal myself?\u003c\/h3\u003e\n\u003cp\u003eOnly if you have access to crimping tools with crimping dies for the correct wire size. Otherwise, a rigger or wire workshop should crimp it, or you can choose a press-free DIY terminal.\u003c\/p\u003e\n\u003ch3\u003eCan you crimp the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a press-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\n\u003cp\u003eChoose the variant according to the nominal diameter of the wire, i.e. the steel core and not the outer diameter of a PVC-coated wire. Also check the hole diameter (D) and the eye thickness (E) against the bolt and fork it will be fitted into, see the dimension drawing.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"2.5mm","offer_id":56229305155926,"sku":"400365","price":21.2,"currency_code":"SEK","in_stock":true},{"title":"3mm","offer_id":56229305188694,"sku":"400366","price":25.7,"currency_code":"SEK","in_stock":true},{"title":"4mm","offer_id":56229305221462,"sku":"400367","price":31.4,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":56229305254230,"sku":"400368","price":48.5,"currency_code":"SEK","in_stock":false},{"title":"6mm","offer_id":56229305286998,"sku":"400369","price":73.6,"currency_code":"SEK","in_stock":true},{"title":"8mm","offer_id":56229305319766,"sku":"400370","price":142.7,"currency_code":"SEK","in_stock":true},{"title":"10mm","offer_id":56229305352534,"sku":"400371","price":234.2,"currency_code":"SEK","in_stock":false},{"title":"12mm","offer_id":56229305385302,"sku":"400372","price":242.6,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-swage-eye-terminal-stainless-steel-m8317.jpg?v=1793175935"},{"product_id":"mini-gangterminal-pressad-utvandig-hogerganga-a4-m8445","title":"Mini thread terminal pressed | external right-hand thread | A4 | M8445","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Pressed terminal – requires pressing tools (hand press, hydraulic press, or swaging machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Want to install it yourself? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003epress-free DIY terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRIGHT-HAND THREAD, SHORT THREAD:\u003c\/strong\u003e This terminal has an external right-hand thread. If the wire is to be tensioned with a turnbuckle body, a pair is required: a right-hand and a left-hand terminal in the same size, see \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-vansterganga-a4-m8446\"\u003eMini-thread terminal pressed | external left-hand thread | A4 | M8446\u003c\/a\u003e. If you need a longer thread, see \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-hogerganga-a4-m8447\"\u003eM8447 with long thread\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMini-thread terminal pressed with external right-hand thread in A4 stainless steel\u003c\/strong\u003e, also known as a mini press terminal, mini swage terminal, or mini stud terminal, is intended for use in corrosive and marine environments. The terminal is pressed (swaged) onto the wire and has a short external thread at the other end. It is more compact than a standard thread terminal with a nut and is used where the wire is to be screwed into a turnbuckle body, threaded sleeve, or fitting. It is suitable for professional installations where long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp\u003eThe product is used in wire railings and railing infills in building and interior environments, boat railings and guardrails, as well as small stays and suspensions. It is intended for applications where the wire is to be terminated with a threaded end and where the choice of material provides the necessary protection against corrosion and mechanical stress. Available for 3 mm (M5), 4 mm (M6), 5 mm (M8), and 6 mm (M10) wire.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (mini-thread terminal, mini press terminal, swage terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial class: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: External right-hand thread, short thread, without nut\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Pressed\/swaged with pressing tools (not press-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: M5–M10\u003c\/li\u003e\n\n\u003cli\u003eWire dimension: 3–6 mm\u003c\/li\u003e\n\n\u003cli\u003eTotal length: 50–85 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eDo I need a right-hand or left-hand thread?\u003c\/h3\u003e\n\u003cp\u003eA turnbuckle body has a right-hand thread at one end and a left-hand thread at the other. Therefore, a right-hand terminal (M8445) and a \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-vansterganga-a4-m8446\"\u003eleft-hand terminal (M8446)\u003c\/a\u003e in the same size are required. For attachment in a threaded sleeve or fitting with a right-hand thread, a right-hand thread is sufficient.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference compared to M8447 with a long thread?\u003c\/h3\u003e\n\u003cp\u003eM8445 has a short thread (total length 50–85 mm). M8447 has a longer thread (total length 90–125 mm), which provides a longer tensioning range or reaches through thicker material. The press sleeve is the same.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a pressed and a press-free (DIY) thread terminal?\u003c\/h3\u003e\n\u003cp\u003eA pressed thread terminal has a smooth sleeve that is clamped onto the wire with pressing tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A press-free DIY terminal has a cone and is installed with standard wrenches. This product is pressed.\u003c\/p\u003e\n\u003ch3\u003eCan you press the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a press-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"3mm \/ M5","offer_id":56229330944342,"sku":"400373","price":15.8,"currency_code":"SEK","in_stock":true},{"title":"4mm \/ M6","offer_id":56229330977110,"sku":"400374","price":17.8,"currency_code":"SEK","in_stock":false},{"title":"5mm \/ M8","offer_id":56229331009878,"sku":"400375","price":25.2,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M10","offer_id":56229331042646,"sku":"400376","price":42.4,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-mini-press-terminal-right-hand-thread-m8445.jpg?v=1793175744"},{"product_id":"mini-gangterminal-pressad-utvandig-vansterganga-a4-m8446","title":"Mini-gang terminal pressed | external left-hand thread | A4 | M8446","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Pressed terminal – requires pressing tools (hand press, hydraulic press, or rolling machine) and is normally installed by a rigger or cable workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Want to install it yourself? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003epress-free DIY terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEFT-HAND THREAD, SHORT THREAD:\u003c\/strong\u003e This terminal has an external left-hand thread and is used in pairs with a right-hand thread terminal of the same size, so that the cable is tensioned when a turnbuckle body is rotated. See \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-hogerganga-a4-m8445\"\u003eMini-gang terminal pressed | external right-hand thread | A4 | M8445\u003c\/a\u003e. If you need a longer thread, see \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-vansterganga-a4-m8448\"\u003eM8448 with long left-hand thread\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMini-gang terminal pressed with external left-hand thread in A4 stainless steel\u003c\/strong\u003e, also called mini pressed terminal left, mini rolling terminal LH, or mini stud terminal LH, is intended for use in corrosive and marine environments. The terminal is pressed (rolled) onto the cable and has a short external left-hand thread at the other end. The product is used where the cable is to be tensioned with a turnbuckle body together with a right-hand thread terminal. It is suitable for professional installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp\u003eThe product is used in cable railings and railing infill in building and interior environments, boat railings and bow rails, as well as small stays where the cable is tensioned with a turnbuckle body. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available for 3 mm (M5), 4 mm (M6), 5 mm (M8), and 6 mm (M10) cable, all with left-hand thread.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Cable terminal (mini-gang terminal, mini pressed terminal, rolling terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial class: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: External left-hand thread (LH), short thread, without nut\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Pressed\/rolled on with pressing tools (not press-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: M5–M10 left-hand thread\u003c\/li\u003e\n\n\u003cli\u003eCable dimension: 3–6 mm\u003c\/li\u003e\n\n\u003cli\u003eTotal length: 50–85 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhen do I need a left-hand thread?\u003c\/h3\u003e\n\u003cp\u003eWhen the cable is to be tensioned with a turnbuckle body. The body has a right-hand thread at one end and a left-hand thread at the other, so you need a \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-hogerganga-a4-m8445\"\u003eright-hand thread terminal (M8445)\u003c\/a\u003e and a left-hand thread terminal (M8446) of the same size. Two left-hand thread terminals do not work in the same body.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference compared to M8448 with a long thread?\u003c\/h3\u003e\n\u003cp\u003eM8446 has a short thread (total length 50–85 mm). M8448 has a longer thread (total length 90–125 mm), which provides a longer tensioning range. The pressing sleeve is the same.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a pressed and a press-free (DIY) thread terminal?\u003c\/h3\u003e\n\u003cp\u003eA pressed thread terminal has a smooth sleeve that is clamped onto the cable with pressing tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the cable. A press-free DIY terminal has a cone and is installed with standard wrenches. This product is pressed.\u003c\/p\u003e\n\u003ch3\u003eCan you press the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or cable workshop, or choose a press-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"3mm \/ M5 LH","offer_id":56229331370326,"sku":"400377","price":16.3,"currency_code":"SEK","in_stock":false},{"title":"4mm \/ M6 LH","offer_id":56229331403094,"sku":"400378","price":16.3,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M8 LH","offer_id":56229331435862,"sku":"400379","price":20.4,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M10 LH","offer_id":56229331468630,"sku":"400380","price":62.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-mini-threaded-terminal-left-hand-a4-m8446.jpg?v=1793175499"},{"product_id":"mini-gangterminal-pressad-lang-utvandig-hogerganga-a4-m8447","title":"Mini thread terminal pressed | long external right-hand thread | A4 | M8447","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Pressed terminal – requires crimping tools (hand crimper, hydraulic press, or swaging machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Want to install it yourself? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ecrimper-free DIY terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRIGHT-HAND THREAD, LONG THREAD:\u003c\/strong\u003e This terminal has a long external right-hand thread. If the wire is to be tensioned with a turnbuckle body, a pair is required: a right-hand and a left-hand terminal in the same size, see \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-vansterganga-a4-m8448\"\u003eMini-thread terminal pressed | long external left-hand thread | A4 | M8448\u003c\/a\u003e. If a shorter thread is sufficient, see \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-hogerganga-a4-m8445\"\u003eM8445 with short thread\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMini-thread terminal pressed with long external right-hand thread in A4 stainless steel\u003c\/strong\u003e, also called mini pressed terminal with long thread, mini swaged terminal, or mini stud terminal, is intended for use in corrosive and marine environments. The terminal is crimped (swaged) onto the wire and has a long external thread at the other end, providing a longer tensioning range. The product is used where the wire is to be screwed into a turnbuckle body, threaded sleeve, or fitting. It is suitable for professional installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp\u003eThe product is used in wire railings and balustrades in building and interior environments, boat railings and guardrails, as well as small stays where a longer thread is required. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available for 4 mm (M6), 5 mm (M8), and 6 mm (M10) wire.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (mini-thread terminal, mini pressed terminal, swaged terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Long external right-hand thread, without nut\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Crimped\/swaged on with crimping tools (not crimper-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eThread size: M6–M10\u003c\/li\u003e\n\n\u003cli\u003eWire size: 4–6 mm\u003c\/li\u003e\n\n\u003cli\u003eTotal length: 90–125 mm (thread length 60–80 mm)\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference compared to M8445 with short thread?\u003c\/h3\u003e\n\u003cp\u003eM8447 has a long thread (thread length 60–80 mm, total length 90–125 mm). \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-hogerganga-a4-m8445\"\u003eM8445\u003c\/a\u003e has a short thread (thread length 30–40 mm, total length 50–85 mm). The crimp sleeve is the same. Choose the long thread when you need more tensioning range or are going through thicker material.\u003c\/p\u003e\n\u003ch3\u003eDo I need right-hand or left-hand thread?\u003c\/h3\u003e\n\u003cp\u003eA turnbuckle body has a right-hand thread at one end and a left-hand thread at the other. Therefore, a right-hand terminal (M8447) and a \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-vansterganga-a4-m8448\"\u003eleft-hand terminal (M8448)\u003c\/a\u003e in the same size are required.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a pressed and a crimper-free (DIY) thread terminal?\u003c\/h3\u003e\n\u003cp\u003eA pressed thread terminal has a smooth sleeve that is crimped onto the wire with crimping tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A crimper-free DIY terminal has a cone and is installed with standard wrenches. This product is pressed.\u003c\/p\u003e\n\u003ch3\u003eCan you crimp the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a crimper-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, providing better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"4mm \/ M6","offer_id":56229335073110,"sku":"400381","price":25.3,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M8","offer_id":56229335105878,"sku":"400382","price":28.9,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M10","offer_id":56229335138646,"sku":"400383","price":76.3,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-mini-swage-stud-terminal-long-thread-m8447.jpg?v=1793176849"},{"product_id":"mini-gangterminal-pressad-lang-utvandig-vansterganga-a4-m8448","title":"Pressed mini-series terminal | long external left-hand thread | A4 | M8448","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Pressed terminal – requires pressing tools (hand press, hydraulic press, or rolling machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Want to install it yourself? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003epress-free DIY terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEFT-HAND THREAD, LONG THREAD:\u003c\/strong\u003e This terminal has a long external left-hand thread and is used in pairs with a right-hand thread terminal of the same size, so that the wire is tensioned when a turnbuckle body is rotated. See \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-hogerganga-a4-m8447\"\u003eMini-gang terminal pressed | long external right-hand thread | A4 | M8447\u003c\/a\u003e. Is a shorter thread sufficient? See \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-vansterganga-a4-m8446\"\u003eM8446 with short left-hand thread\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMini-gang terminal pressed with long external left-hand thread in A4 stainless steel\u003c\/strong\u003e, also called mini pressed terminal left with long thread, mini rolling terminal LH, or mini stud terminal LH, is intended for use in corrosive and marine environments. The terminal is pressed (rolled) onto the wire and has a long external left-hand thread at the other end, providing a longer tensioning range. The product is used where the wire is to be tensioned with a turnbuckle body together with a right-hand thread terminal. It is suitable for professional installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in wire railings and railing infills in building and interior environments, boat railings and bow rails, as well as small stays where the wire is tensioned with a turnbuckle body. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available for 4 mm (M6), 5 mm (M8), and 6 mm (M10) wire, all with left-hand thread.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (mini-gang terminal, mini pressed terminal, rolling terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Long external left-hand thread (LH), without nut\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Pressed\/rolled on with pressing tools (not press-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: M6–M10 left-hand thread\u003c\/li\u003e\n\n\u003cli\u003eWire dimension: 4–6 mm\u003c\/li\u003e\n\n\u003cli\u003eTotal length: 90–125 mm (thread length 60–80 mm)\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhen do I need a left-hand thread?\u003c\/h3\u003e\n\u003cp\u003eWhen the wire is to be tensioned with a turnbuckle body. The body has a right-hand thread at one end and a left-hand thread at the other, so you need a \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-hogerganga-a4-m8447\"\u003eright-hand thread terminal (M8447)\u003c\/a\u003e and a left-hand thread terminal (M8448) of the same size. Two left-hand thread terminals do not work in the same body.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference compared to M8446 with a short thread?\u003c\/h3\u003e\n\u003cp\u003eM8448 has a long thread (thread length 60–80 mm, total length 90–125 mm). \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-vansterganga-a4-m8446\"\u003eM8446\u003c\/a\u003e has a short thread (thread length 30–40 mm, total length 50–85 mm). The pressing sleeve is the same.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a pressed and a press-free (DIY) thread terminal?\u003c\/h3\u003e\n\u003cp\u003eA pressed thread terminal has a smooth sleeve that is clamped onto the wire with pressing tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A press-free DIY terminal has a cone and is installed with standard wrenches. This product is pressed.\u003c\/p\u003e\n\u003ch3\u003eCan you press the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a press-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, providing better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"4mm \/ M6 LH","offer_id":56229336088918,"sku":"400384","price":19.8,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M8 LH","offer_id":56229336121686,"sku":"400385","price":29.9,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M10 LH","offer_id":56229336154454,"sku":"400386","price":64.7,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-mini-swage-stud-terminal-long-left-hand-thread-m8448.jpg?v=1793176695"},{"product_id":"mini-gangterminal-pressad-invandig-hogerganga-a4-m8449","title":"Mini-thread terminal pressed | internal right-hand thread | A4 | M8449","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Crimp terminal – requires crimping tools (hand crimper, hydraulic press or swaging machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Want to install it yourself? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ecrimp-free DIY terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINTERNAL RIGHT-HAND THREAD:\u003c\/strong\u003e This terminal has an internal right-hand thread (threaded sleeve). If you need a left-hand thread, see \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-vansterganga-a4-m8450\"\u003eMini-gangterminal crimped | internal left-hand thread | A4 | M8450\u003c\/a\u003e. If you want an external thread, see \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-hogerganga-a4-m8445\"\u003eM8445\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMini-gangterminal crimped with internal right-hand thread in A4 stainless steel\u003c\/strong\u003e, also called a mini swage terminal with internal thread, sleeve terminal or mini swage terminal with internal thread, is intended for use in corrosive and marine environments. The terminal is a smooth tube that is crimped (swaged) onto the wire at one end and has an internal thread at the other, where a screw or threaded rod is screwed in. The product is used primarily on railing parts and boat railings where a discreet, smooth appearance is desired. It is suitable for professional installations where a long lifespan and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in railing construction, wire railings and boat and yacht railings. It is intended for applications where the wire is to be attached with a screw or threaded fitting and where the material choice provides the necessary protection against corrosion and mechanical stress. Available for 3 mm (M5), 4 mm (M6), 5 mm (M6) and 6 mm (M8) wire.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (mini-gangterminal, swage terminal, sleeve terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Internal right-hand thread\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Crimped\/swaged with crimping tools (not crimp-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eThread size: M5–M8 (internal)\u003c\/li\u003e\n\n\u003cli\u003eWire size: 3–6 mm\u003c\/li\u003e\n\n\u003cli\u003eTotal length: 55–85 mm\u003c\/li\u003e\n\n\u003cli\u003eSurface finish: Polished\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhat do I screw into the internal thread?\u003c\/h3\u003e\n\u003cp\u003eA screw, threaded rod or threaded fitting with the same thread size, for example an M6 screw for 4 and 5 mm wire. The thread depth is 20–25 mm depending on size, see the dimension drawing (L3).\u003c\/p\u003e\n\u003ch3\u003eDo I need a right-hand or left-hand thread?\u003c\/h3\u003e\n\u003cp\u003eFor standard fastening with a screw, a right-hand thread is sufficient. If the wire is to be tensioned with a threaded rod that has right- and left-hand threads, a right-hand (M8449) and a \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-vansterganga-a4-m8450\"\u003eleft-hand terminal (M8450)\u003c\/a\u003e of the same size are required.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a crimped and a crimp-free (DIY) terminal?\u003c\/h3\u003e\n\u003cp\u003eA crimped terminal has a smooth sleeve that is clamped onto the wire with crimping tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A crimp-free DIY terminal has a cone and is installed with standard wrenches. This product is crimped.\u003c\/p\u003e\n\u003ch3\u003eCan you crimp the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a crimp-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"3mm \/ M5","offer_id":56229336383830,"sku":"400387","price":17.6,"currency_code":"SEK","in_stock":true},{"title":"4mm \/ M6","offer_id":56229336416598,"sku":"400388","price":31.7,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M6","offer_id":56229336449366,"sku":"400389","price":38.1,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M8","offer_id":56229336482134,"sku":"400390","price":52.8,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-mini-swage-terminal-internal-thread-a4.jpg?v=1793174359"},{"product_id":"mini-gangterminal-pressad-invandig-vansterganga-a4-m8450","title":"Mini thread terminal pressed | internal left-hand thread | A4 | M8450","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Crimp terminal – requires crimping tools (hand crimper, hydraulic press or swaging machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Want to install it yourself? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ecrimp-free DIY terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINTERNAL LEFT-HAND THREAD:\u003c\/strong\u003e This terminal has an internal left-hand thread and is used in pairs with a right-hand thread terminal of the same size, see \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-hogerganga-a4-m8449\"\u003eMini-thread terminal crimped | internal right-hand thread | A4 | M8449\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMini-thread terminal crimped with internal left-hand thread in A4 stainless steel\u003c\/strong\u003e, also called mini swage terminal with internal left-hand thread, LH sleeve terminal or mini swage terminal with LH internal thread, is intended for use in corrosive and marine environments. The terminal is a smooth tube that is crimped (swaged) onto the wire at one end and has an internal left-hand thread at the other. The product is used where the wire is to be tensioned with a threaded rod or a fitting with right- and left-hand threads, together with a right-hand thread terminal. It is suitable for professional installations where long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\n\u003cp\u003eThe product is used in railing construction, wire railings and boat and yacht handrails. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available for 3 mm (M5), 4 mm (M6), 5 mm (M6) and 6 mm (M8) wire, all with left-hand thread.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (mini-thread terminal, swage terminal, sleeve terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Internal left-hand thread (LH)\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Crimped\/swaged with crimping tools (not crimp-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: M5–M8 left-hand thread (internal)\u003c\/li\u003e\n\n\u003cli\u003eWire dimension: 3–6 mm\u003c\/li\u003e\n\n\u003cli\u003eTotal length: 55–85 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eWhen do I need a left-hand thread?\u003c\/h3\u003e\n\u003cp\u003eWhen the wire is to be tensioned with a threaded rod or a fitting that has a right-hand thread at one end and a left-hand thread at the other. In that case, a \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-hogerganga-a4-m8449\"\u003eright-hand thread terminal (M8449)\u003c\/a\u003e and a left-hand thread terminal (M8450) of the same size are required. For standard screw fastening, a right-hand thread is sufficient.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a crimped and a crimp-free (DIY) terminal?\u003c\/h3\u003e\n\u003cp\u003eA crimped terminal has a smooth sleeve that is clamped onto the wire with crimping tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the wire. A crimp-free DIY terminal has a cone and is installed with standard wrenches. This product is crimped.\u003c\/p\u003e\n\u003ch3\u003eCan you crimp the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a crimp-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"3mm \/ M5 LH","offer_id":56229337006422,"sku":"400391","price":20.5,"currency_code":"SEK","in_stock":true},{"title":"4mm \/ M6 LH","offer_id":56229337039190,"sku":"400392","price":22.5,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M6 LH","offer_id":56229337071958,"sku":"400393","price":37.2,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M8 LH","offer_id":56229337104726,"sku":"400394","price":79.8,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-mini-swage-terminal-left-hand-thread.jpg?v=1793174135"},{"product_id":"domehead-terminal-pressad-a4-m8558","title":"Pressed dome head terminal | A4 | M8558","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Crimp terminal – requires crimping tools (hand crimper, hydraulic press or rolling machine) and is normally installed by a rigger or wire workshop. Cannot be installed with standard hand tools.\u003c\/strong\u003e Want to install it yourself? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003epress-free DIY terminals\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDomehead terminal crimped in A4 stainless steel\u003c\/strong\u003e, also called a dome head terminal, cable end terminal or dome head terminal, is intended for use in corrosive and marine environments. The terminal is crimped (rolled) onto the cable end and has a low, domed head. The cable is threaded through a hole in a post or fitting, and the head rests against the surface as a discreet end fitting. The product is used where the cable needs to be anchored with a clean and understated appearance. It is suitable for professional installations where long service life and consistent performance are crucial.\u003c\/p\u003e\n\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\n\u003cp\u003eThe product is used in cable railings and balustrades in architecture and interior design, stair railings, balconies, facades and balustrades. It is intended for applications where the cable needs to be terminated against a post or fitting and where the choice of material provides the necessary protection against corrosion and mechanical stress. Available for 3, 4, 5 and 6 mm cable.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Cable terminal (domehead terminal, dome head, dome head terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Domed head (dome head), crimp sleeve for cable\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Crimped\/rolled on with crimping tools (not press-free\/DIY)\u003c\/li\u003e\n\n\u003cli\u003eCable size: 3–6 mm\u003c\/li\u003e\n\n\u003cli\u003eTotal length: 25–40 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eHow large a hole is needed in the post?\u003c\/h3\u003e\n\u003cp\u003eThe hole should be larger than the sleeve diameter (D1) but smaller than the head diameter (D3). Example: for 4 mm cable, D1 is 6.5 mm and D3 is 11 mm, so a hole of approx. 7 mm works. See the dimensional drawing for other sizes.\u003c\/p\u003e\n\u003ch3\u003eHow is the cable tensioned with a domehead terminal?\u003c\/h3\u003e\n\u003cp\u003eThe domehead terminal is a fixed end fitting. The cable is tensioned at the other end, for example with a threaded terminal and nut or a turnbuckle.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a crimped and a press-free (DIY) terminal?\u003c\/h3\u003e\n\u003cp\u003eA crimped terminal has a smooth sleeve that is clamped onto the cable with crimping tools. It provides a slim, permanent connection but requires tools and cannot be removed without cutting the cable. A press-free DIY terminal has a cone and is installed with standard wrenches. This product is crimped.\u003c\/p\u003e\n\u003ch3\u003eCan you crimp the terminal for me?\u003c\/h3\u003e\n\u003cp\u003eNo, we only sell the components. Contact a rigger or wire workshop, or choose a press-free DIY terminal that you install yourself.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\n\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"3mm","offer_id":56229339365718,"sku":"400395","price":19.8,"currency_code":"SEK","in_stock":false},{"title":"4mm","offer_id":56229339398486,"sku":"400396","price":19.8,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":56229339431254,"sku":"400397","price":21.3,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":56229339464022,"sku":"400398","price":30.9,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-domehead-terminal-stainless-steel-fitting.jpg?v=1793173838"},{"product_id":"ogleterminal-pressfri-diy-1x19-a4-m8322","title":"Eye terminal crimp-free DIY | for wire rope 1x19 | A4 | M8322","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Press-free DIY terminal – installed with standard hand tools (wrenches), without crimping tools. Only for 1×19 wire rope (rigid wire rope with 19 strands). Not suitable for 7×7, 7×19 or other flexible wire ropes.\u003c\/strong\u003e Should the terminal be crimped by a rigger instead? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ecrimped wire rope terminals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePress-free DIY eye terminal in A4 stainless steel\u003c\/strong\u003e, also known as a press-free eye, screw terminal with eye, self-installing terminal or swageless eye terminal, is intended for use in corrosive and marine environments. The terminal is screwed onto the wire rope end without crimping tools and has a flat eye with a hole on the other end. The product is used where a 1×19 wire rope needs to be attached to a fork, a fork shackle, a shackle or a mounting eye. It is suitable for installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\u003cp\u003eThe product is used in marine rigging (shrouds and stays), wire rope railings and stay lines where the wire rope is of the 1×19 type and where the terminal can be installed on site without crimping tools. It is intended for applications where the wire rope is to be terminated with an eye and where the material choice provides the necessary protection against corrosion and mechanical stress. Available for 1×19 wire rope in 4, 5, 6, 8 and 10 mm.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire rope terminal (press-free eye terminal, screw terminal eye, DIY terminal, swageless eye)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Flat eye with hole, cone locking for wire rope\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Press-free – assembled with hand tools (DIY)\u003c\/li\u003e\n\n\u003cli\u003eWire rope construction: only 1×19\u003c\/li\u003e\n\n\u003cli\u003eWire rope dimension: 4–10 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eWhich wire rope is the terminal suitable for?\u003c\/h3\u003e\u003cp\u003eOnly wire rope with the 1×19 construction, a rigid wire rope with 19 strands primarily used for shrouds, stays and wire rope railings. The terminal locks the outer strands of the wire rope around a cone inside the sleeve, and the cone is adapted to 1×19. For softer wire rope such as 7×7 or 7×19, you should choose a crimped terminal or another solution. Choose the size according to the nominal diameter of the wire rope.\u003c\/p\u003e\u003ch3\u003eHow is a press-free terminal installed?\u003c\/h3\u003e\u003cp\u003eThe principle is the same as for other press-free cone terminals: the sleeve is placed on the wire rope, the outer strands of the wire rope are loosened a bit from the end, the cone is placed on the core strands and the outer strands are laid back evenly around the cone. Then the parts of the terminal are screwed together and tightened with wrenches. Follow the manufacturer's instructions for the exact stripping length and tightening, and check that no strands are out of place before loading the wire rope.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between a crimped and a press-free (DIY) terminal?\u003c\/h3\u003e\u003cp\u003eA crimped terminal has a smooth sleeve that is clamped onto the wire rope with crimping tools (hand crimping tool, hydraulic press or rolling machine). It becomes slim and permanent but requires tools and normally a rigger. A press-free DIY terminal is mechanically locked with a cone and thread and installed with standard wrenches, for example on board or on site. It is coarser than a crimped terminal. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire rope terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan you install the terminal for me?\u003c\/h3\u003e\u003cp\u003eNo, we only sell the components and do not perform any installation work. The press-free terminal is intended to be installed by you yourself with hand tools.\u003c\/p\u003e\u003ch3\u003eCan the terminal be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load for the terminal and it is not intended as a lifting tool. Size the wire rope and fitting according to the current application and applicable regulations.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e\u003ch3\u003eIs the eye terminal also available crimped?\u003c\/h3\u003e\u003cp\u003eYes, see \u003ca href=\"\/en\/products\/ogleterminal-pressad-a4-m8317\"\u003eCrimped eye terminal | A4 | M8317\u003c\/a\u003e. It fits more wire rope constructions but requires crimping tools. If you need a fork instead of an eye, see \u003ca href=\"\/en\/products\/gaffelterminal-pressfri-diy-1x19-a4-m8323\"\u003ePress-free DIY fork terminal | for 1x19 wire rope | A4 | M8323\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\u003cp\u003eChoose the variant according to the nominal diameter of the wire rope. Also check the hole diameter (D) and the thickness of the eye (C) against the bolt and the fork it will sit in, see the dimension drawing.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"4mm","offer_id":56229567922518,"sku":"400399","price":425.4,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":56229567955286,"sku":"400400","price":569.0,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":56229567988054,"sku":"400401","price":1019.1,"currency_code":"SEK","in_stock":true},{"title":"8mm","offer_id":56229568020822,"sku":"400402","price":1019.1,"currency_code":"SEK","in_stock":true},{"title":"10mm","offer_id":56229568053590,"sku":"400403","price":1487.9,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-diy-swageless-eye-terminal-a4-stainless.jpg?v=1793173643"},{"product_id":"gaffelterminal-pressfri-diy-1x19-a4-m8323","title":"Fork terminal crimp-free DIY | for wire rope 1x19 | A4 | M8323","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Press-free DIY terminal – installed with standard hand tools (wrenches), without pressing tools. Only for 1×19 wire rope (rigid wire rope with 19 strands). Not suitable for 7×7, 7×19 or other flexible wire ropes.\u003c\/strong\u003e Should the terminal be pressed by a rigger instead? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003epressed wire rope terminals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFork terminal press-free DIY in A4 stainless steel\u003c\/strong\u003e, also called press-free fork, screw terminal with fork, self-installation terminal or swageless jaw\/fork terminal, is intended for use in corrosive and marine environments. The terminal is screwed onto the wire rope end without pressing tools and has a fork with a fork bolt at the other end. The product is used where a 1×19 wire rope is to be attached around an eye, a shackle or a mounting eye. It is suitable for installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\u003cp\u003eThe product is used in marine rigging (shrouds and stays), wire rope railings and stay lines where the wire rope is of type 1×19 and where the terminal can be installed on site without pressing tools. It is intended for applications where the wire rope is to be terminated with a fork and where the material choice provides the necessary protection against corrosion and mechanical stress. Available for 1×19 wire rope in 4, 5, 6 and 8 mm.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire rope terminal (press-free fork terminal, screw terminal fork, DIY terminal, swageless jaw)\u003c\/li\u003e\n\n\u003cli\u003eMaterial class: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Fork with fork bolt, cone locking for wire rope\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Press-free – screwed together with hand tools (DIY)\u003c\/li\u003e\n\n\u003cli\u003eWire rope construction: only 1×19\u003c\/li\u003e\n\n\u003cli\u003eWire rope dimension: 4–8 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eWhich wire rope is the terminal suitable for?\u003c\/h3\u003e\u003cp\u003eOnly wire rope with the 1×19 construction, a rigid wire rope with 19 strands primarily used for shrouds, stays and wire rope railings. The terminal locks the outer strands of the wire rope around a cone inside the sleeve, and the cone is adapted to 1×19. For softer wire rope such as 7×7 or 7×19, you should choose a pressed terminal or another solution. Choose the size according to the nominal diameter of the wire rope.\u003c\/p\u003e\u003ch3\u003eHow is a press-free terminal installed?\u003c\/h3\u003e\u003cp\u003eThe principle is the same as for other press-free cone terminals: the sleeve is placed on the wire rope, the outer strands of the wire rope are loosened a bit from the end, the cone is placed on the core strands and the outer strands are laid back evenly around the cone. Then the parts of the terminal are screwed together and tightened with wrenches. Follow the manufacturer's instructions for the exact stripping length and tightening, and check that no strands are out of place before loading the wire rope.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between a pressed and a press-free (DIY) terminal?\u003c\/h3\u003e\u003cp\u003eA pressed terminal has a smooth sleeve that is clamped onto the wire rope with pressing tools (hand press, hydraulic press or rolling machine). It becomes slim and permanent but requires tools and normally a rigger. A press-free DIY terminal is mechanically locked with a cone and thread and installed with standard wrenches, for example on board or on site. It is coarser than a pressed terminal. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire rope terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan you install the terminal for me?\u003c\/h3\u003e\u003cp\u003eNo, we only sell the components and do not perform any installation work. The press-free terminal is intended to be installed by yourself with hand tools.\u003c\/p\u003e\u003ch3\u003eCan the terminal be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load for the terminal and it is not intended as a lifting device. Size the wire rope and fitting according to the current application and applicable regulations.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e\u003ch3\u003eIs the fork terminal also available pressed?\u003c\/h3\u003e\u003cp\u003eYes, in two versions: \u003ca href=\"\/en\/products\/gaffelterminal-pressad-svetsad-a4-m8316\"\u003eFork terminal pressed | welded | A4 | M8316\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gaffelterminal-pressad-svarvad-a4-m8316mt\"\u003eFork terminal pressed | turned | A4 | M8316MT\u003c\/a\u003e. They require pressing tools. If you need an eye instead of a fork, see \u003ca href=\"\/en\/products\/ogleterminal-pressfri-diy-1x19-a4-m8322\"\u003eEye terminal press-free DIY | for wire rope 1x19 | A4 | M8322\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\u003cp\u003eChoose the variant according to the nominal diameter of the wire rope. Also check the fork opening (C) and the bolt diameter (D) against the eye or mounting eye that the fork will sit on, see the dimension drawing.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"4mm","offer_id":56229577949526,"sku":"400404","price":510.6,"currency_code":"SEK","in_stock":true},{"title":"5mm","offer_id":56229577982294,"sku":"400405","price":705.5,"currency_code":"SEK","in_stock":true},{"title":"6mm","offer_id":56229578015062,"sku":"400406","price":718.9,"currency_code":"SEK","in_stock":true},{"title":"8mm","offer_id":56229578047830,"sku":"400407","price":829.8,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-gaffelterminal-pressfri-diy-a4-vajer.jpg?v=1793173435"},{"product_id":"skarvterminal-pressfri-diy-1x19-a4-m8324","title":"Sleeve terminal crimp-free DIY | for wire rope 1x19 | A4 | M8324","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Press-free DIY terminal – installed with standard hand tools (wrenches), without crimping tools. Only for 1×19 wire rope (rigid wire rope with 19 strands). Not suitable for 7×7, 7×19 or other flexible wire ropes.\u003c\/strong\u003e Should the terminal be crimped by a rigger instead? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ecrimped wire rope terminals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePress-free DIY splice terminal in A4 stainless steel\u003c\/strong\u003e, also known as a double terminal, wire rope splice, press-free splice sleeve or swageless double connector, is intended for use in corrosive and marine environments. The terminal has a cone lock at each end and splices two wire rope ends together without crimping tools. The product is used where a 1×19 wire rope needs to be extended or repaired. It is suitable for installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\u003cp\u003eThe product is used in marine rigging, wire rope railings and stays where the wire rope is of the 1×19 type and where two wire rope ends need to be spliced on site without crimping tools. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available for 8 mm 1×19 wire rope.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire rope terminal (press-free splice terminal, double terminal, wire rope splice, swageless double connector)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Double cone lock, one wire rope at each end\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Press-free – screwed together with hand tools (DIY)\u003c\/li\u003e\n\n\u003cli\u003eWire rope construction: 1×19 only\u003c\/li\u003e\n\n\u003cli\u003eWire rope dimension: 8 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eWhich wire rope is the terminal suitable for?\u003c\/h3\u003e\u003cp\u003eOnly wire rope with the 1×19 construction, a rigid wire rope with 19 strands primarily used for shrouds, stays and wire rope railings. The terminal locks the outer strands of the wire rope around a cone inside the sleeve, and the cone is adapted to 1×19. For softer wire rope such as 7×7 or 7×19, you should choose a crimped terminal or another solution. Choose the size according to the nominal diameter of the wire rope.\u003c\/p\u003e\u003ch3\u003eHow is a press-free terminal installed?\u003c\/h3\u003e\u003cp\u003eThe principle is the same as for other press-free cone terminals: the sleeve is slid onto the wire rope, the outer strands of the wire rope are loosened a short distance from the end, the cone is slid onto the core strands and the outer strands are laid back evenly around the cone. Then the parts of the terminal are screwed together and tightened with wrenches. Follow the manufacturer's instructions for the exact stripping length and tightening torque, and check that no strands are out of place before loading the wire rope.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between a crimped and a press-free (DIY) terminal?\u003c\/h3\u003e\u003cp\u003eA crimped terminal has a smooth sleeve that is clamped onto the wire rope with crimping tools (hand crimping tool, hydraulic press or rolling machine). It becomes slim and permanent but requires tools and normally a rigger. A press-free DIY terminal is locked mechanically with a cone and thread and installed with standard wrenches, for example on board or on site. It is coarser than a crimped terminal. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire rope terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan you install the terminal for me?\u003c\/h3\u003e\u003cp\u003eNo, we only sell the components and do not perform any installation work. The press-free terminal is intended to be installed by you yourself with hand tools.\u003c\/p\u003e\u003ch3\u003eCan the terminal be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load for the terminal and it is not intended as a lifting device. Size the wire rope and fitting according to the current application and applicable regulations.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e\u003ch3\u003eCan I splice two wire ropes of different diameters?\u003c\/h3\u003e\u003cp\u003eNo, the splice terminal is made for the same wire rope dimension at both ends, 8 mm 1×19.\u003c\/p\u003e\u003ch3\u003eWhat other press-free terminals are available?\u003c\/h3\u003e\u003cp\u003eSee \u003ca href=\"\/en\/products\/ogleterminal-pressfri-diy-1x19-a4-m8322\"\u003ePress-free DIY eye terminal | M8322\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gaffelterminal-pressfri-diy-1x19-a4-m8323\"\u003ePress-free DIY fork terminal | M8323\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-1x19-a4-m8326\"\u003ePress-free DIY threaded terminal | M8326\u003c\/a\u003e.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"8mm","offer_id":56229606097238,"sku":"400408","price":1568.3,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-skarvterminal-pressfri-a4-vajer-8mm.jpg?v=1793173213"},{"product_id":"gangterminal-pressfri-diy-1x19-a4-m8326","title":"Threaded terminal crimp-free DIY | for wire rope 1x19 | A4 | M8326","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Press-free DIY terminal – installed with standard hand tools (wrenches), without pressing tools. Only for 1×19 wire rope (rigid wire rope with 19 strands). Not suitable for 7×7, 7×19 or other flexible wire ropes.\u003c\/strong\u003e Should the terminal be pressed by a rigger instead? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003epressed wire rope terminals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThreaded terminal press-free DIY in A4 stainless steel\u003c\/strong\u003e, also called press-free threaded terminal, screw terminal with external thread, threaded stud for wire rope or swageless stud terminal, is intended for use in corrosive and marine environments. The terminal is screwed onto the wire rope end without pressing tools and has an external right-hand thread at the other end. The product is used where a 1×19 wire rope is to be connected to a turnbuckle, a stud with internal thread or stretched through a post with a nut. It is suitable for installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\u003cp\u003eThe product is used in marine rigging (shrouds and stays), wire rope railings and stay lines where the wire rope is of the 1×19 type and where the terminal can be installed on site without pressing tools. It is intended for applications where the wire rope is to be terminated with a thread for tensioning and where the material choice provides the necessary protection against corrosion and mechanical stress. Available for 1×19 wire rope in 4 mm (M8), 5 mm (M10), 6 mm (M12) and 8 mm (M16).\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire rope terminal (press-free threaded terminal, screw terminal thread, DIY terminal, swageless stud)\u003c\/li\u003e\n\n\u003cli\u003eMaterial class: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: M8, M10, M12, M16 (right-hand thread)\u003c\/li\u003e\n\n\u003cli\u003eDesign: External thread, cone locking for wire rope\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Press-free – assembled with hand tools (DIY)\u003c\/li\u003e\n\n\u003cli\u003eWire rope construction: only 1×19\u003c\/li\u003e\n\n\u003cli\u003eWire rope dimension: 4–8 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eWhich wire rope is the terminal suitable for?\u003c\/h3\u003e\u003cp\u003eOnly wire rope with the 1×19 construction, a rigid wire rope with 19 strands primarily used for shrouds, stays and wire rope railings. The terminal locks the outer strands of the wire rope around a cone inside the sleeve, and the cone is adapted to 1×19. For softer wire rope such as 7×7 or 7×19, you should choose a pressed terminal or another solution. Choose the size according to the nominal diameter of the wire rope.\u003c\/p\u003e\u003ch3\u003eHow is a press-free terminal installed?\u003c\/h3\u003e\u003cp\u003eThe principle is the same as for other press-free cone terminals: the sleeve is slid onto the wire rope, the outer strands of the wire rope are loosened a bit from the end, the cone is slid onto the core strands and the outer strands are laid back evenly around the cone. Then the parts of the terminal are screwed together and tightened with wrenches. Follow the manufacturer's instructions for the exact stripping length and tightening torque, and check that no strands are out of place before loading the wire rope.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between a pressed and a press-free (DIY) terminal?\u003c\/h3\u003e\u003cp\u003eA pressed terminal has a smooth sleeve that is clamped onto the wire rope with pressing tools (hand press, hydraulic press or rolling machine). It becomes slim and permanent but requires tools and normally a rigger. A press-free DIY terminal is mechanically locked with a cone and thread and installed with standard wrenches, for example on board or on site. It is coarser than a pressed terminal. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire rope terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan you install the terminal for me?\u003c\/h3\u003e\u003cp\u003eNo, we only sell the components and do not perform any installation work. The press-free terminal is intended to be installed by you yourself with hand tools.\u003c\/p\u003e\u003ch3\u003eCan the terminal be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load for the terminal and it is not intended as a lifting tool. Dimension the wire rope and fitting according to the current application and applicable regulations.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e\u003ch3\u003eWhat thread does the terminal have?\u003c\/h3\u003e\u003cp\u003eMetric right-hand thread: M8 for 4 mm wire rope, M10 for 5 mm, M12 for 6 mm and M16 for 8 mm. The thread length (L2) is shown in the dimension drawing. Nut is not included according to WASI's data sheet.\u003c\/p\u003e\u003ch3\u003eIs the threaded terminal also available pressed?\u003c\/h3\u003e\u003cp\u003eYes, see \u003ca href=\"\/en\/products\/gangterminal-pressad-med-mutter-a4-m8320\"\u003ePressed threaded terminal | right-hand thread with nut | A4 | M8320\u003c\/a\u003e and left-hand threaded \u003ca href=\"\/en\/products\/gangterminal-pressad-vansterganga-med-mutter-a4-m8620\"\u003eM8620\u003c\/a\u003e. They fit more wire rope constructions but require pressing tools.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"4mm \/ M8","offer_id":56229611176278,"sku":"400409","price":528.0,"currency_code":"SEK","in_stock":true},{"title":"5mm \/ M10","offer_id":56229611209046,"sku":"400410","price":589.9,"currency_code":"SEK","in_stock":true},{"title":"6mm \/ M12","offer_id":56229611241814,"sku":"400411","price":659.4,"currency_code":"SEK","in_stock":true},{"title":"8mm \/ M16","offer_id":56229611274582,"sku":"400412","price":912.9,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-swageless-stud-terminal-a4-stainless-steel.jpg?v=1793172970"},{"product_id":"gangterminal-pressfri-diy-invandig-ganga-m6-a4-m8451","title":"Press-free thread insert DIY | internal thread M6 | A4 | M8451","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Press-free DIY terminal – secured to the wire with locking screws in the sleeve and installed with hand tools, without a pressing tool. Suitable for 3 and 4 mm wire.\u003c\/strong\u003e Should the terminal be pressed by a rigger instead? See our \u003ca href=\"\/en\/collections\/vajerterminal\"\u003epressed wire terminals\u003c\/a\u003e, for example \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-hogerganga-a4-m8449\"\u003eMini-thread terminal pressed | internal right-hand thread | M8449\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign: Choose right- or left-hand thread as a variant.\u003c\/strong\u003e One right-hand and one left-hand terminal are used in pairs when the wire is to be tensioned by turning a threaded rod or an intermediate piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThread terminal press-free DIY with internal thread in stainless steel A4\u003c\/strong\u003e, also called screw terminal for self-installation, wire terminal with internal thread or DIY terminal, is intended for use in corrosive and marine environments. The wire is inserted into the sleeve and secured with screws, and at the other end there is an internal M6 thread. The product is used where a thin wire is to be connected to a threaded rod, a loop or fork with external thread M6 or a wire railing bracket. It is suitable for installations where a long lifespan and consistent performance are crucial.\u003c\/p\u003e\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\u003cp\u003eThe product is used in wire railings, railing infill, pergolas, green walls, barriers and suspensions where the wire is 3 or 4 mm and where the terminal can be installed on site without a pressing tool. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal (press-free thread terminal, screw terminal for self-installation, DIY terminal)\u003c\/li\u003e\n\n\u003cli\u003eMaterial class: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: internal M6, right- or left-hand thread\u003c\/li\u003e\n\n\u003cli\u003eDesign: Sleeve Ø12 mm, length 80 mm, hole for wire Ø4.4 mm, thread depth 35 mm\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Press-free – the wire is secured with locking screws (DIY)\u003c\/li\u003e\n\n\u003cli\u003eWire dimension: 3 and 4 mm\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eWhat wire is the terminal suitable for?\u003c\/h3\u003e\u003cp\u003eWire with a nominal diameter of 3 or 4 mm. Unlike the press-free cone terminals for 1×19 wire, this one is secured with screws, and the terminal is stated to be usable with the common constructions 1×19, 7×7 and 7×19. The hole is 4.4 mm, so a PVC-coated wire must be stripped where it enters the sleeve – it is the steel wire that is to be secured.\u003c\/p\u003e\u003ch3\u003eHow is the terminal installed?\u003c\/h3\u003e\u003cp\u003eCut the wire straight, insert it into the sleeve all the way to the stop and tighten the locking screws. Then screw the terminal onto an M6 thread with the same thread direction. Check the tightness after a period of use.\u003c\/p\u003e\u003ch3\u003eWhen is a left-hand thread needed?\u003c\/h3\u003e\u003cp\u003eWhen two terminals are used against the same threaded intermediate piece, for example a threaded rod with right- and left-hand thread, so that the wire is tensioned when the rod is turned. Otherwise, right-hand thread is sufficient.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between a pressed and a press-free (DIY) terminal?\u003c\/h3\u003e\u003cp\u003eA pressed terminal is clamped onto the wire with a pressing tool and becomes slim and permanent. A press-free DIY terminal is mechanically secured and installed with regular hand tools. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan you install the terminal for me?\u003c\/h3\u003e\u003cp\u003eNo, we only sell the components and do not perform any installation work.\u003c\/p\u003e\u003ch3\u003eCan the terminal be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. No breaking load is specified and the terminal is not intended as a lifting device.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304).\u003c\/p\u003e","brand":"WASI","offers":[{"title":"Right","offer_id":56229614256470,"sku":"400413","price":70.5,"currency_code":"SEK","in_stock":true},{"title":"Left","offer_id":56229614289238,"sku":"400414","price":70.2,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-diy-wire-terminal-stainless-steel-m6.jpg?v=1793172745"},{"product_id":"gaffelterminal-invandig-ganga-hogerganga-a4-m8455","title":"Fork terminal with internal thread | right-hand thread | A4 | M8455","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Not installed on the wire and not crimped. The fork is screwed onto a wire terminal or threaded rod with an external right-hand thread of the same thread size, for example \u003ca href=\"\/en\/products\/gangterminal-pressad-med-mutter-a4-m8320\"\u003eCrimp-on threaded terminal M8320\u003c\/a\u003e, \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-hogerganga-a4-m8445\"\u003eMini-threaded terminal M8445\u003c\/a\u003e, \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-hogerganga-a4-m8447\"\u003eLong mini-threaded terminal M8447\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-1x19-a4-m8326\"\u003eDIY non-crimp threaded terminal M8326\u003c\/a\u003e, and secured with a lock nut.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRIGHT-HAND THREAD:\u003c\/strong\u003e If the wire is to be tensioned with a turnbuckle body, right- and left-hand threads are required in pairs. The equivalent fork with a left-hand thread is \u003ca href=\"\/en\/products\/gaffelterminal-invandig-ganga-vansterganga-a4-m8456\"\u003eFork terminal with internal thread | left-hand thread | A4 | M8456\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFork terminal with internal right-hand thread in A4 stainless steel\u003c\/strong\u003e, also known as a fork with internal thread, fork head, threaded fork or jaw with internal thread, is intended for use in corrosive and marine environments. It has a fork with a bolt and locking device at one end and an internal metric thread at the other, so that a threaded terminal or threaded rod can be finished with a fork. The product is used where the wire is to be attached around an eye, a mounting eye or a wire plate. It is suitable for installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\u003cp\u003eThe product is used in wire railings, marine rigging, guy wires, pergolas and barriers, together with threaded wire terminals. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available with internal right-hand threads M5, M6, M8 and M10.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal, accessories (fork terminal with internal thread, fork head, jaw)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eThread size: internal M5–M10, right-hand thread\u003c\/li\u003e\n\n\u003cli\u003eDesign: Fork with bolt and locking device, internal thread\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Screwed onto an external thread and secured with a lock nut (not crimped)\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eHow is the fork installed?\u003c\/h3\u003e\u003cp\u003eScrew a nut onto the external thread of the terminal, then screw the fork in as far as the thread engages fully in the threaded part of the fork (L2) and tighten the nut against the fork as a lock nut. The fork and the terminal must have the same thread size and the same thread direction – right-hand thread.\u003c\/p\u003e\u003ch3\u003eWhich terminals are compatible?\u003c\/h3\u003e\u003cp\u003eAll wire terminals with an external right-hand thread of the same size, for example \u003ca href=\"\/en\/products\/gangterminal-pressad-med-mutter-a4-m8320\"\u003eCrimp-on threaded terminal M8320\u003c\/a\u003e, \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-hogerganga-a4-m8445\"\u003eMini-threaded terminal M8445\u003c\/a\u003e, \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-hogerganga-a4-m8447\"\u003eLong mini-threaded terminal M8447\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-1x19-a4-m8326\"\u003eDIY non-crimp threaded terminal M8326\u003c\/a\u003e. Check the thread size of the terminal you have: M5, M6, M8 or M10.\u003c\/p\u003e\u003ch3\u003eDo I need crimping tools?\u003c\/h3\u003e\u003cp\u003eNo. This part is not crimped and is not installed on the wire – it is screwed together with a wire terminal that is already installed on the wire. The wire terminal itself can be crimped or non-crimp (DIY). We only sell the components and do not perform any installation work. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan the part be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load and the part is not intended for use as a lifting device.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M5","offer_id":56250503463254,"sku":"400415","price":38.5,"currency_code":"SEK","in_stock":true},{"title":"M6","offer_id":56250503496022,"sku":"400416","price":45.3,"currency_code":"SEK","in_stock":true},{"title":"M8","offer_id":56250503528790,"sku":"400417","price":60.1,"currency_code":"SEK","in_stock":true},{"title":"M10","offer_id":56250503561558,"sku":"400418","price":106.7,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-gaffelterminal-invandig-ganga-a4-rostfritt.jpg?v=1793172585"},{"product_id":"gaffelterminal-invandig-ganga-vansterganga-a4-m8456","title":"Fork terminal with internal thread | left-hand thread | A4 | M8456","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Not fitted onto the wire rope or crimped. The fork is screwed onto a wire rope terminal or threaded rod with an external left-hand (LH) thread of the same thread size, for example \u003ca href=\"\/en\/products\/gangterminal-pressad-vansterganga-med-mutter-a4-m8620\"\u003eThreaded terminal crimped left-hand thread M8620\u003c\/a\u003e, \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-vansterganga-a4-m8446\"\u003eMini threaded terminal left-hand thread M8446\u003c\/a\u003e and \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-vansterganga-a4-m8448\"\u003eMini threaded terminal long left-hand thread M8448\u003c\/a\u003e, and secured with a lock nut.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLEFT-HAND THREAD:\u003c\/strong\u003e If the wire rope is to be tensioned with a turnbuckle, right- and left-hand threads are required in pairs. The equivalent fork with a right-hand thread is \u003ca href=\"\/en\/products\/gaffelterminal-invandig-ganga-hogerganga-a4-m8455\"\u003eFork terminal with internal thread | right-hand thread | A4 | M8455\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFork terminal with internal left-hand thread (LH) in A4 stainless steel\u003c\/strong\u003e, also known as fork with internal thread, fork head, threaded fork or jaw with internal thread, is intended for use in corrosive and marine environments. It has a fork with a bolt and locking device at one end and an internal metric thread at the other, so that a threaded terminal or threaded rod can be finished with a fork. The product is used where the wire rope is to be attached around an eye, a mounting eye or a wire rope plate. It is suitable for installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\u003cp\u003eThe product is used in wire rope railings, marine rigging, stays, pergolas and barriers, together with threaded wire rope terminals. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available with internal left-hand thread (LH) M5, M6, M8 and M10.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire rope terminal, accessories (fork terminal with internal thread, fork head, jaw)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: internal M5–M10, left-hand thread (LH)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Fork with bolt and locking device, internal thread\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Screwed onto an external thread and secured with a lock nut (not crimped)\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eHow is the fork installed?\u003c\/h3\u003e\u003cp\u003eScrew a nut onto the external thread of the terminal, then screw the fork in as far as the thread engages fully in the threaded part of the fork (L2) and tighten the nut against the fork as a lock nut. The fork and the terminal must have the same thread size and the same thread direction – left-hand thread (LH).\u003c\/p\u003e\u003ch3\u003eWhich terminals are suitable?\u003c\/h3\u003e\u003cp\u003eAll wire rope terminals with an external left-hand thread (LH) of the same size, for example \u003ca href=\"\/en\/products\/gangterminal-pressad-vansterganga-med-mutter-a4-m8620\"\u003eThreaded terminal crimped left-hand thread M8620\u003c\/a\u003e, \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-utvandig-vansterganga-a4-m8446\"\u003eMini threaded terminal left-hand thread M8446\u003c\/a\u003e and \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-lang-utvandig-vansterganga-a4-m8448\"\u003eMini threaded terminal long left-hand thread M8448\u003c\/a\u003e. Check the thread size of the terminal you have: M5, M6, M8 or M10.\u003c\/p\u003e\u003ch3\u003eDo I need crimping tools?\u003c\/h3\u003e\u003cp\u003eNo. This part is not crimped and is not fitted onto the wire rope – it is screwed together with a wire rope terminal that is already fitted onto the wire rope. The wire rope terminal itself can be crimped or crimp-free (DIY). We only sell the components and do not perform any installation work. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire rope terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan the part be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load and the part is not intended for use as a lifting device.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M5 LH","offer_id":56250509623638,"sku":"400419","price":48.6,"currency_code":"SEK","in_stock":true},{"title":"M6 LH","offer_id":56250509656406,"sku":"400420","price":50.1,"currency_code":"SEK","in_stock":true},{"title":"M8 LH","offer_id":56250509689174,"sku":"400421","price":57.7,"currency_code":"SEK","in_stock":true},{"title":"M10 LH","offer_id":56250509721942,"sku":"400422","price":125.9,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-jaw-terminal-internal-left-hand-thread.jpg?v=1793172354"},{"product_id":"gaffelterminal-utvandig-ganga-hogerganga-a4-m8552","title":"Fork terminal with external thread | right-hand thread | A4 | M8552","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Not installed on the wire and not crimped. The fork is screwed into a wire terminal with an internal right-hand thread of the same thread size, for example \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-hogerganga-a4-m8449\"\u003eMini-thread terminal internal right-hand thread M8449\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-invandig-ganga-m6-a4-m8451\"\u003eThread terminal crimp-free DIY M8451\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRIGHT-HAND THREAD:\u003c\/strong\u003e The equivalent fork with a left-hand thread is \u003ca href=\"\/en\/products\/gaffelterminal-utvandig-ganga-vansterganga-a4-m8553\"\u003eFork terminal with external thread | left-hand thread | A4 | M8553\u003c\/a\u003e. If you need a loop instead of a fork, see \u003ca href=\"\/en\/products\/ogleterminal-utvandig-ganga-hogerganga-a4-m8554\"\u003eLoop terminal with external thread | right-hand thread | A4 | M8554\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFork terminal with external right-hand thread in A4 stainless steel\u003c\/strong\u003e, also called fork with external thread, threaded fork, fork piece with threaded stud or jaw with external thread, is intended for use in corrosive and marine environments. It has a fork with a bolt and locking device at one end and an external metric thread at the other. The product is used where a wire terminal with an internal thread is to be finished with a fork that is fastened around a loop, a mounting eye, or a sail clew. The thread also allows for readjusting the length of the wire. It is suitable for installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\u003cp\u003eThe product is used in wire railings, pergolas and green walls, guy wires and barriers together with terminals with internal threads. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available with external right-hand threads M5, M6, M8 and M10.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Wire terminal, accessories (fork terminal with external thread, threaded fork, jaw)\u003c\/li\u003e\n\n\u003cli\u003eMaterial class: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: external M5–M10, right-hand thread\u003c\/li\u003e\n\n\u003cli\u003eDesign: Fork with bolt and locking device, external threaded stud\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Screwed into internal thread (no crimping)\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eHow is the fork installed?\u003c\/h3\u003e\u003cp\u003eScrew the fork's threaded stud into the terminal's internal thread. The fork and the terminal must have the same thread size and thread direction – right-hand thread. If you want to lock the position, a nut can be screwed onto the threaded stud and tightened against the terminal as a lock nut.\u003c\/p\u003e\u003ch3\u003eWhich terminals are suitable?\u003c\/h3\u003e\u003cp\u003eWire terminals with internal right-hand threads of the same size, for example \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-hogerganga-a4-m8449\"\u003eMini-thread terminal internal right-hand thread M8449\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-invandig-ganga-m6-a4-m8451\"\u003eThread terminal crimp-free DIY M8451\u003c\/a\u003e. Crimped mini-thread terminals have internal threads M5, M6 or M8; the crimp-free M8451 has M6.\u003c\/p\u003e\u003ch3\u003eWhat is the difference compared to a fork with an internal thread?\u003c\/h3\u003e\u003cp\u003eThis fork has an external thread and is screwed \u003cem\u003einto\u003c\/em\u003e a terminal. The fork with an internal thread (\u003ca href=\"\/en\/products\/gaffelterminal-invandig-ganga-hogerganga-a4-m8455\"\u003eM8455\u003c\/a\u003e) is screwed \u003cem\u003eonto\u003c\/em\u003e a terminal with an external thread.\u003c\/p\u003e\u003ch3\u003eDo I need crimping tools?\u003c\/h3\u003e\u003cp\u003eNo. This part is not crimped and is not placed on the wire – it is screwed together with a wire terminal that is already on the wire. The wire terminal itself can be crimped or crimp-free (DIY). We only sell the components and do not perform any installation work. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ewire terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan the part be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load and the part is not intended as a lifting device.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M5","offer_id":56250545832278,"sku":"400423","price":20.5,"currency_code":"SEK","in_stock":true},{"title":"M6","offer_id":56250545865046,"sku":"400424","price":21.2,"currency_code":"SEK","in_stock":true},{"title":"M8","offer_id":56250545897814,"sku":"400425","price":40.8,"currency_code":"SEK","in_stock":true},{"title":"M10","offer_id":56250545930582,"sku":"400426","price":71.9,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-gaffelterminal-utvandig-ganga-a4-rostfri.jpg?v=1793172243"},{"product_id":"gaffelterminal-utvandig-ganga-vansterganga-a4-m8553","title":"Fork terminal with external thread | left-hand thread | A4 | M8553","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Not mounted on the cable and not crimped. The fork is screwed into a cable terminal with an internal left-hand (LH) thread of the same thread size, for example \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-vansterganga-a4-m8450\"\u003eMini-thread cable terminal with internal left-hand thread M8450\u003c\/a\u003e and left-hand threaded \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-invandig-ganga-m6-a4-m8451\"\u003eThreaded cable terminal press-free DIY M8451\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLEFT-HAND THREAD:\u003c\/strong\u003e The equivalent fork with a right-hand thread is \u003ca href=\"\/en\/products\/gaffelterminal-utvandig-ganga-hogerganga-a4-m8552\"\u003eFork cable terminal with external thread | right-hand thread | A4 | M8552\u003c\/a\u003e. If you need a loop instead of a fork, see \u003ca href=\"\/en\/products\/ogleterminal-utvandig-ganga-vansterganga-a4-m8555\"\u003eLoop cable terminal with external thread | left-hand thread | A4 | M8555\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFork cable terminal with external left-hand (LH) thread in A4 stainless steel\u003c\/strong\u003e, also called a fork with external thread, threaded fork, fork stud, or jaw with external thread, is intended for use in corrosive and marine environments. It has a fork with a bolt and locking pin at one end and an external metric thread at the other. The product is used where a cable terminal with an internal thread is to be finished with a fork that attaches around a loop, a mounting eye, or a cable clamp. The thread also allows for readjusting the cable length. It is suitable for installations where a long service life and consistent performance are crucial.\u003c\/p\u003e\u003ch2\u003eAPPLICATION AREA\u003c\/h2\u003e\u003cp\u003eThe product is used in cable railings, pergolas and green walls, guy wires and barriers together with terminals with internal threads. It is intended for applications where the choice of material provides the necessary protection against corrosion and mechanical stress. Available with external left-hand (LH) thread M5, M6, M8 and M10.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Cable terminal, accessories (fork cable terminal with external thread, threaded fork, jaw)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: external M5–M10, left-hand thread (LH)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Fork with bolt and locking pin, external thread stud\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Screwed into internal thread (no crimping)\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eHow is the fork installed?\u003c\/h3\u003e\u003cp\u003eScrew the fork stud into the terminal's internal thread. The fork and the terminal must have the same thread size and thread direction – left-hand thread (LH). If you want to lock the position, a nut can be screwed onto the thread stud and tightened against the terminal as a lock nut.\u003c\/p\u003e\u003ch3\u003eWhich terminals are compatible?\u003c\/h3\u003e\u003cp\u003eCable terminals with internal left-hand (LH) thread in the same size, for example \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-vansterganga-a4-m8450\"\u003eMini-thread cable terminal with internal left-hand thread M8450\u003c\/a\u003e and left-hand threaded \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-invandig-ganga-m6-a4-m8451\"\u003eThreaded cable terminal press-free DIY M8451\u003c\/a\u003e. Crimped mini-thread cable terminals have internal thread M5, M6 or M8; the press-free M8451 has M6.\u003c\/p\u003e\u003ch3\u003eWhat is the difference compared to a fork with an internal thread?\u003c\/h3\u003e\u003cp\u003eThis fork has an external thread and is screwed \u003cem\u003einto\u003c\/em\u003e a terminal. The fork with an internal thread (\u003ca href=\"\/en\/products\/gaffelterminal-invandig-ganga-vansterganga-a4-m8456\"\u003eM8456\u003c\/a\u003e) is screwed \u003cem\u003eonto\u003c\/em\u003e a terminal with an external thread.\u003c\/p\u003e\u003ch3\u003eDo I need crimping tools?\u003c\/h3\u003e\u003cp\u003eNo. This part is not crimped and is not placed on the cable – it is screwed together with a cable terminal that is already on the cable. The cable terminal itself can be crimped or press-free (DIY). We only sell the components and do not perform any installation work. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ecable terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan the part be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load and the part is not intended for use as a lifting device.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, which provides better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M5 LH","offer_id":56250554286422,"sku":"400427","price":27.4,"currency_code":"SEK","in_stock":true},{"title":"M6 LH","offer_id":56250554319190,"sku":"400428","price":27.4,"currency_code":"SEK","in_stock":true},{"title":"M8 LH","offer_id":56250554351958,"sku":"400429","price":31.3,"currency_code":"SEK","in_stock":true},{"title":"M10 LH","offer_id":56250554384726,"sku":"400430","price":78.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-gaffelterminal-utvandig-vansterganga-a4.jpg?v=1793171905"},{"product_id":"ogleterminal-utvandig-ganga-hogerganga-a4-m8554","title":"Eye terminal with external thread | right-hand thread | A4 | M8554","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Not installed on the cable or crimped. The eye is screwed into a cable terminal or other component with an internal right-hand thread of the same thread size, for example \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-hogerganga-a4-m8449\"\u003eMini-thread terminal, internal right-hand thread M8449\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-invandig-ganga-m6-a4-m8451\"\u003eThread terminal, crimp-free DIY M8451\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRIGHT-HAND THREAD:\u003c\/strong\u003e The equivalent eye with a left-hand thread is \u003ca href=\"\/en\/products\/ogleterminal-utvandig-ganga-vansterganga-a4-m8555\"\u003eEye terminal with external thread | left-hand thread | A4 | M8555\u003c\/a\u003e. If you need a fork instead of an eye, see \u003ca href=\"\/en\/products\/gaffelterminal-utvandig-ganga-hogerganga-a4-m8552\"\u003eFork terminal with external thread | right-hand thread | A4 | M8552\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEye terminal with external right-hand thread in A4 stainless steel\u003c\/strong\u003e, also known as an eye with thread, threaded eye, or eye with external thread, is intended for use in corrosive and marine environments. It has a flat eye with a hole at one end and an external metric thread at the other. According to WASI, it is primarily used in architectural applications such as railing systems, cable stays, and plant supports. The cable connection can be tightened or loosened using the thread length. It is suitable for installations where a long service life and consistent performance are essential.\u003c\/p\u003e\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\u003cp\u003eThe product is used in cable railings, trellises, and green walls, cable stays, and barriers together with internal-thread terminals. For longer adjustment range, WASI recommends a turnbuckle. The eye can be connected to a shackle, carabiner, or fork terminal. Available with external right-hand threads M5, M6, M8, and M10.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Cable terminal, accessories (eye terminal with external thread, threaded eye)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eThread dimension: external M5–M10, metric ISO right-hand thread\u003c\/li\u003e\n\n\u003cli\u003eDesign: Flat eye with hole, external threaded stud\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Screwed into an internal thread (no crimping)\u003c\/li\u003e\n\n\u003cli\u003eSurface finish: Electropolished\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eHow is the eye installed?\u003c\/h3\u003e\u003cp\u003eScrew the eye's threaded stud into the terminal's internal thread. The eye and the terminal must have the same thread size and thread direction – right-hand thread. By screwing the eye in or out, the length of the cable can be fine-tuned. A nut on the threaded stud can be used as a lock nut.\u003c\/p\u003e\u003ch3\u003eWhich terminals are compatible?\u003c\/h3\u003e\u003cp\u003eCable terminals and other components with an internal right-hand thread of the same size, for example \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-hogerganga-a4-m8449\"\u003eMini-thread terminal, internal right-hand thread M8449\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gangterminal-pressfri-diy-invandig-ganga-m6-a4-m8451\"\u003eThread terminal, crimp-free DIY M8451\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\u003cp\u003eChoose the thread size based on the terminal's internal thread. Also check the hole diameter (A) and the eye thickness (E) against the bolt or shackle it will be fitted into; see the dimensional drawing.\u003c\/p\u003e\u003ch3\u003eDo I need crimping tools?\u003c\/h3\u003e\u003cp\u003eNo. This part is not crimped and is not installed on the cable – it is screwed together with a cable terminal that is already installed on the cable. The cable terminal itself can be crimped or crimp-free (DIY). We only sell the components and do not perform any installation work. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ecable terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan the part be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load, and the part is not intended for use as lifting equipment.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, providing better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M5","offer_id":56250562347350,"sku":"400431","price":24.1,"currency_code":"SEK","in_stock":true},{"title":"M6","offer_id":56250562380118,"sku":"400432","price":24.1,"currency_code":"SEK","in_stock":true},{"title":"M8","offer_id":56250562412886,"sku":"400433","price":32.5,"currency_code":"SEK","in_stock":false},{"title":"M10","offer_id":56250562445654,"sku":"400434","price":49.7,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-eye-terminal-external-thread-a4-stainless.jpg?v=1793100550"},{"product_id":"ogleterminal-utvandig-ganga-vansterganga-a4-m8555","title":"Eye terminal with external thread | left-hand thread | A4 | M8555","description":"\u003cp\u003e\u003cstrong\u003eINSTALLATION: Not fitted onto the cable or crimped. The eye is screwed into a cable terminal or other component with an internal left-hand (LH) thread of the same size, for example the \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-vansterganga-a4-m8450\"\u003eMini-gang terminal with internal left-hand thread M8450\u003c\/a\u003e (6 mm cable, M8 left).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLEFT-HAND THREAD:\u003c\/strong\u003e The equivalent eye with a right-hand thread is the \u003ca href=\"\/en\/products\/ogleterminal-utvandig-ganga-hogerganga-a4-m8554\"\u003eEye terminal with external thread | right-hand thread | A4 | M8554\u003c\/a\u003e (available in M5–M10). If you need a fork instead of an eye, see the \u003ca href=\"\/en\/products\/gaffelterminal-utvandig-ganga-vansterganga-a4-m8553\"\u003eFork terminal with external thread | left-hand thread | A4 | M8553\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEye terminal with external left-hand (LH) thread in A4 stainless steel\u003c\/strong\u003e, also known as an eye with thread, threaded eye, or eye with external thread, is intended for use in corrosive and marine environments. It has a flat eye with a hole at one end and an external metric thread at the other. According to WASI, it is primarily used in architectural applications such as handrail systems, cable stays, and plant supports. The cable connection can be tightened or loosened using the thread length. It is suitable for installations where a long service life and consistent performance are essential.\u003c\/p\u003e\u003ch2\u003eAPPLICATION\u003c\/h2\u003e\u003cp\u003eThe product is used in cable handrails, pergolas and green walls, cable stays and barriers together with internal-thread terminals. For a longer adjustment range, WASI recommends a turnbuckle. The eye can be connected to a shackle, carabiner or fork terminal. Available with an M8 external left-hand (LH) thread.\u003c\/p\u003e\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eProduct type: Fitting\u003c\/li\u003e\n\n\u003cli\u003eProduct family: Cable terminal, accessories (eye terminal with external thread, threaded eye)\u003c\/li\u003e\n\n\u003cli\u003eMaterial grade: A4 (AISI 316, acid-resistant)\u003c\/li\u003e\n\n\u003cli\u003eThread size: external M8, metric ISO left-hand thread (LH)\u003c\/li\u003e\n\n\u003cli\u003eDesign: Flat eye with hole, external threaded stud\u003c\/li\u003e\n\n\u003cli\u003eInstallation: Screwed into an internal thread (no crimping)\u003c\/li\u003e\n\n\u003cli\u003eSurface finish: Electropolished\u003c\/li\u003e\n\n\u003cli\u003eEnvironment: Marine\u003c\/li\u003e\n\n\u003cli\u003eDelivery unit: Piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eFREQUENTLY ASKED QUESTIONS (FAQ)\u003c\/h2\u003e\u003ch3\u003eHow is the eye installed?\u003c\/h3\u003e\u003cp\u003eScrew the eye's threaded stud into the terminal's internal thread. The eye and the terminal must have the same thread size and direction – left-hand thread (LH). By screwing the eye in or out, the cable length can be fine-tuned. A nut on the threaded stud can be used as a lock nut.\u003c\/p\u003e\u003ch3\u003eWhich terminals are suitable?\u003c\/h3\u003e\u003cp\u003eCable terminals and other components with an internal left-hand (LH) thread of the same size, for example the \u003ca href=\"\/en\/products\/mini-gangterminal-pressad-invandig-vansterganga-a4-m8450\"\u003eMini-gang terminal with internal left-hand thread M8450\u003c\/a\u003e (6 mm cable, M8 left).\u003c\/p\u003e\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\u003cp\u003eChoose the thread size based on the terminal's internal thread. Also check the hole diameter (A) and the eye thickness (E) against the bolt or shackle it will be fitted into; see the dimensional drawing.\u003c\/p\u003e\u003ch3\u003eDo I need crimping tools?\u003c\/h3\u003e\u003cp\u003eNo. This part is not crimped and is not fitted onto the cable – it is screwed together with a cable terminal that is already fitted onto the cable. The cable terminal itself can be crimped or crimp-free (DIY). We only sell the components and do not perform any installation work. See all \u003ca href=\"\/en\/collections\/vajerterminal\"\u003ecable terminals\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCan the part be used for lifting?\u003c\/h3\u003e\u003cp\u003eNo. WASI does not specify a breaking load, and the part is not intended for use as lifting equipment.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between A2 and A4?\u003c\/h3\u003e\u003cp\u003eA4 (AISI 316) contains molybdenum and is acid-resistant, providing better resistance to salt and chlorides than A2 (AISI 304). A4 is recommended for boats and coastal environments.\u003c\/p\u003e","brand":"WASI","offers":[{"title":"M8 LH","offer_id":56250568409430,"sku":"400435","price":30.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/files\/rostfri-nu-eye-terminal-m8-left-hand-thread.jpg?v=1793100465"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/7864\/1494\/collections\/wire-7-19-A4-M8063._2f582de9-5d4b-472c-87da-c7045b00a217.jpg?v=1793037585","url":"https:\/\/rostfri.nu\/en\/collections\/vajer-och-tillbehor.oembed","provider":"Rostfri.nu","version":"1.0","type":"link"}